804559
14
Zoom out
Zoom in
Previous page
1/196
Next page
– 5
Empty the fresh water tank and waste
water tank.
Tilt the appliance backward and store it
on the pushing handle.
Unscrew and remove the left and right
screws on the cleaning head.
Remove the cleaning head.
1 Nozzle
2 Fastening clip
3 Hose clip
Pull the fastener clip off to the side.
Pull the nozzle backwards out of the
support plate.
Open the hose clip and pull the nozzle
off the hose.
Insert the new nozzle into the hose.
Assemble it back in the reverse se-
quence.
NOTICE
When inserting the nozzle into the support
plate, watch for the correct alignement of
the nozzle.
Empty the fresh water tank and waste
water tank.
Tilt the appliance backward and store it
on the pushing handle.
Unscrew and remove the left and right
screws on the cleaning head.
Remove the cleaning head.
1 Brush roller
2 Brush storage screws
3 Toothed belt cover
4 Motor attachment nuts
Loosen the screw on the toothed belt
cover screw and remove the cover.
Unscrew the nuts on the motor attach-
ment and slide the motor to the brush.
Remove the toothed belt.
Loosen the threaded pin of the toothed
gear pulley on the brush and remove
the toothed gear belt.
Unscrew the screws of the brush bear-
ings and pull the bearings from the
brush shaft.
Lift the drive end of the brush roller out
of the housing and pull the opposite
side out of the bearing.
Install the new brush in reverse order.
DANGER
Danger of injury by electric shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Get the electrical components checked and
repaired only by authorised customer ser-
vice persons.
Contact an authorised customer service
person in case of problems not mentioned
in this chapter or if you are in doubt or when
you have been explicitly asked to do so.
Plug in the mains plug.
Check facility fuse.
Maintenance Works
Replace the nozzle
Exchanging the brush
1
2
3
Troubleshooting
Appliance is not working
1
22
3
4
14 EN
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher BR 30-15 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BR 30-15 C in the language / languages: All languages as an attachment in your email.

The manual is 5.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info