804751
14
Zoom out
Zoom in
Previous page
1/252
Next page
14 English
27 Suction bar lever
28 Battery plug connector
29 Key-operated switch
30 Display
31 Working speed rotary knob
32 Driving direction switch
33 Waste water tank drain hose with dosing
unit
Battery
1Button
2Charge indicator
3Battery
Colour coding
Control elements for the cleaning pro-
cess are yellow.
Control elements for maintenance and
servicing are light grey.
Symbols on the device
* optional
Installation
Unloading
1. Remove the carton.
2. Remove the straps.
3. Remove the wooden blocks fastened to
the pallet by screws.
4. Using the 3 upper reinforcing boards of
the carton packaging and the securing
board screwed laterally on the pallet,
place a ramp in front of the pallet and se-
cure it using board pallet screws.
1Securing board
2Beam
3Reinforcing board
5. Push the beam which has been un-
screwed from the pallet under the ramp
for support and screw into place.
6. Press the cleaning head lever down and
latch it in place.
7. Only for BD 80/100 and BR 85/100:
Press the brake lever down.
1Brake lever
Note
For BD 70/75 and BR 75/75, there is no
brake. Releasing the brake is not neces-
sary with this device.
8. Pull the device backwards off the pallet.
9. Only for BD 80/100 and BR 85/100:
Press the brake lever up.
Installing the suction bar
1. Insert the suction bar in the suction bar
mount.
2. Tighten the wing nuts.
3. Fit the suction hose.
Batteries
Recommended batteries
ATTENTION
Risk of damage
Using other batteries may damage the device.
Only use the recommended batteries.
Installing and connecting batteries
CAUTION
Removing and installing the batteries
Unstable machine position
Ensure that the machine is positioned stably
when removing and installing the batteries.
ATTENTION
Incorrect connection polarity
Destruction of the control electronics
Take care to ensure the correct polarity
when connecting the batteries.
ATTENTION
Deep discharge
Risk of damage
Charge the batteries before starting the device.
1. Drain the waste water.
2. Pivot the waste water tank upwards.
3. Disconnect the battery plug.
4. Place the battery in the device as
shown.
BD 80/100:
1Battery
2Battery pole
3Spacer 150x150x65
4Circular connector
5Spacer 90x185x335 (2 pieces on top of
each other)
Fresh water tank drain opening
Waste water tank drain opening
Increased cleaning head contact
pressure
Battery access
Fresh water tank filling level (50%)
Insert the charger plug here
Lashing point
* Mop holder
ATTENTION
Incorrect socket
Risk of damage
DO NOT insert the charger plug
here
Normal cleaning head contact
pressure
Raise the cleaning head
Pedal for raising/lowering the
cleaning head
Brush replacement pedal
1
Device Battery
BD 70/75 W Classic Bp
Pack 80 Ah Li
1 x 6.654-454.0
BD 70/75 W Classic Bp
Pack 160 Ah Li
2 x 6.654-454.0
BD 80/100 W Classic Bp
Pack 160 Ah Li
2 x 6.654-454.0
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher BD 80-100 W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BD 80-100 W in the language / languages: All languages as an attachment in your email.

The manual is 141.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info