Manual Karcher BD 50-60 C (page 12 of 200) (All languages)

804755

Zoom out

Zoom in

1/200

- 3

1 OFF

Device is switched off

2 Normal mode

Wet clean the floor and vacuum up dirt

water.

3 Intense mode

Wet clean the floor and allow the deter-

gent to react.

4 Vacuum mode

Suck in the dirt fleet.

5 Program selection switch

6 Indicator light voltage supply

Glows when the mains plug is inserted

and when there is mains voltage.

** option

Unscrew the screws from the middle

board of the pallet.

Push down the device holding the push

handle and pull out the middle board.

Remove the chocks in front of and next

to the wheels.

Push down the device holding the push

handle and push it forwards up to the

edge of the pallet.

Lift the device off the pallet and set it on

the floor.

Insert the vacuum bar into the vacuum

bar suspension in such a manner that

the profiled sheet is positioned above

the suspension.

Tighten the wing nuts.

Insert the suction hose.

DANGER

Risk of injury!

In dangerous situations, release the safety

switch/drive lever.

Open the lock of the fresh water reservoir.

Fill fresh water (maximum 60 °C) until

the lower edge of the filling nozzle.

Close the lock of the fresh water reservoir.

몇WARNING

Risk of damage. Only use the recommended

detergents. With other detergents, the operator

bears the increased risk regarding the opera-

tional safety and danger of accident.

Only use detergents that are free from solvents,

hydrochloric acid and hydrofluoric acid.

Follow the safety instructions for using de-

tergents.

Note:

Do not use highly foaming detergents.

Recommended detergents:

Add the detergent to the fresh water

reservoir.

Note:

If the fresh water tank is empty, the clean-

ing head continues working without liquid

supply.

Adjust the water quantity using the reg-

ulating button according to the dirt on

the floor covering.

Note:

Carry out initial cleaning attempts with low

water volume. Increase water volume step-

by-step until the desired cleaning result is

achieved.

To improve the vacuuming result on tiled

floors the vacuum bar can be turned to an

oblique position of up to 5°.

Loosen the wing nuts.

Turn the vacuum bar.

Tighten the wing screws.

If the vacuum result is unsatisfactory the in-

clination of the straight vacuum bar can be

modified.

Adjust the rotary handle to incline the

suction bar.

The bend of the suction lips upon contact

with the floor is influenced with the height

adjustment.

Try adjusting the twist handles of the

height adjustment until the best vacu-

uming result is achieved.

Operator console

Symbols on the machine

Mains plug

Lashing point

Mop holder **

Filling level fresh water

tank 25%

Bow brush change

Vacuum bar lowering le-

ver

Drain outlet fresh water

tank

Dirt water discharge hose

Before Startup

Unloading

Installing the Vacuum Bar

Operation

Filling in detergents

Fresh water

Detergent

Application Detergent

Routine cleaning of all water

resistant floors

RM 746

RM 780

Routine cleaning of glossy

surfaces (e.g. granite)

RM 755 es

Routine cleaning and basic

cleaning of industrial floors

RM 69 ASF

Routine cleaning and basic

cleaning of fine stoneware tiles

RM 753

Routine cleaning of tiles in

sanitary areas

RM 751

Cleaning and disinfection in

sanitary areas

RM 732

Removal of coating from all

alkali-resistant floors (e.g.

PVC)

RM 752

Removal of coating from li-

noleum floors

RM 754

Setting the water quantity

Setting the Vacuum Bar

Oblique position

Inclination

Height

12 EN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BD 50-60 C in the language / languages: All languages as an attachment in your email.

The manual is 22.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher BD 50-60 C Manual

Product: