804767
18
Zoom out
Zoom in
Previous page
1/212
Next page
18 English
3. Pull the string reel off the support and dispose of it
properly.
4. Possibly. wind a cutting string on the new string reel.
5. Fit the string reel in the support.
6. Fit the string reel cover in the support. Take care to
ensure that the string reel cover audibly latches into
place.
Troubleshooting guide
Malfunctions often have simple causes that you can
remedy yourself using the following overview. When in
doubt, or in the case of malfunctions not mentioned
here, please contact your authorised Customer Service.
As the battery pack ages, even if it is looked after, its ca-
pacity reduces such that the full run time will no longer
be reached when fully charged. This does not indicate a
defect.
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Technical data
Subject to technical modifications.
Vibration value
WARNING
The specified vibration value was measured using a
standard test procedure and may be used to compare
devices.
The specified vibration value may be used in a provi-
sional assessment of the load.
Depending on the way the device is used, the vibration
emission can deviate from the specified overall value
during the current use of the device.
Device with a hand-arm vibration value >
2.5 m/s² (see chapter Technical Data in the
Fault Cause Rectification
The device does not start
up
Battery pack is not inserted correctly. Push the battery pack into the mounting
until it latches into place.
Battery pack is empty Charge the battery pack.
Battery pack is defective. Replace the battery pack.
The device stops during
operation
Cutting head blocked by cutting residue Remove the cutting residue.
Motor is overloaded Mow only suitable cutting material, see
Chapter Intended use.
Motor has overheated Stop working and allow the motor to cool
down.
The battery has overheated Stop working and allow the battery to cool
down to normal battery temperature.
BCU
260/36
Bp
Device performance data
Working voltage of the battery V 36
Working width of brushcutter mm 260
Working width of string trimmer mm 380
Cutting string, diameter mm 1.65
Max. Speed (± 100), brushcutter /
string trimmer
/min 5600
Brushcutter: Determined values according to
EN ISO 11806-1
Sound pressure level LpA dB(A) 77.0
Uncertainty KpA dB(A) 3.0
Sound power level LWA + K uncer-
taintyWA
dB(A) 94
Right handle hand-arm vibration
value
m/s21.3
Left handle hand-arm vibration
value
m/s23.6
Uncertainty K m/s21.5
String trimmer: Determined values in acc. with
EN 50636-2-91
Sound pressure level LpA dB(A) 80.5
Uncertainty KpA dB(A) 3.0
Sound power level LWA + K uncer-
taintyWA
dB(A) 95
Right handle hand-arm vibration
value
m/s23.5
Left handle hand-arm vibration
value
m/s26.3
Uncertainty K m/s21.5
Dimensions and weights of brushcutter
Length x width x height mm 1804 x 6
44 x 364
Weight (without battery pack) kg 4.2
Dimensions and weights of string trimmer
Length x width x height mm 1767 x 6
44 x 428
Weight (without battery pack) kg 4.3
BCU
260/36
Bp
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher BCU 260-36 Bp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BCU 260-36 Bp in the language / languages: All languages as an attachment in your email.

The manual is 26.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info