804767
14
Zoom out
Zoom in
Previous page
1/212
Next page
14 English
when any persons or animals enter this area. ● Keep
the cutting head below the level of your hips. ● Never
use the device with damaged or absent safety devices.
● The blades on the device are sharp. Wear sturdy pro-
tective gloves and work carefully when installing, re-
placing, cleaning or checking the seating of screws.
● Serious injuries from contact with the rotating knife.
Keep the device under control with both hands until the
knife has come to a complete standstill. Do not try to
touch or stop the knife while it is moving. ● The brush-
cutter is fitted with a carrying harness. Carefully adjust
the carrying harness to distribute the weight of the de-
vice. Familiarise yourself with the carrying harness and
the quick-release buckle before using the device. Cor-
rect use can protect you from serious injuries in the
event of danger. Do not wear clothing over the carrying
belt or otherwise interfere with access to the quick re-
lease buckle. ● Replace damaged knives. ● Make sure
that the knife is correctly mounted and securely at-
tached before each use of the device. ● Use only the
manufacturer's replacement Tri-Arc knife and do not
use any other cutting tools. ● Do not cut clippings with a
diameter greater than 13 mm. ● Pull the cutting protec-
tion over the knife before storing or transporting the de-
vice. ● Remove the blade guard before operation, as
the knife guard can be flung around when the knife
starts to move. ● Always hold the device firmly with both
hands. Working from right to left when cutting will make
your work easier and increase safety. You can thus min-
imise the risk of kickback if the knife hits an unexpected
object. ● Only operate the device outdoors. ● Keep your
hands and feet away from the cutting area, especially
when switching on the motor. ● Risk of injury because
the blades continue rotating after the motor has been
switched off. ● Make sure that the ventilation openings
are free of deposits. ● Check the device for damage be-
fore each use and after any impacts. Damaged parts,
e.g. a switch, must be repaired or replaced by the au-
thorised Customer Service department. ● Ensure that
the drive head attachment is correctly fitted and fas-
tened. ● Ensure that all protective devices, deflectors
and handles are correctly fitted and securely fastened.
● Danger of injury. Do not make any modifications to the
device.
Safe operation with a string reel
These safety instructions must also be observed when
operating with a string reel
WARNING ● Never use a metallic cutting
string. ● Danger of injury. The blade on the protective
cover for shortening the cutting string is very sharp and
you must avoid touching this, especially when cleaning
the device. ● Ensure that the drive head attachment is
correctly fitted and fastened. ● Use only replacement
strings from the original manufacturer. Do not use any
other cutting attachment.
Safe servicing and care
WARNING ● After pushing out a new string,
bring the device into the normal operating position be-
fore switching it on. ● Ensure that the device is in a safe
condition by regularly checking that all bolts, nuts and
screws are screwed tight. ● Check that the moving parts
function correctly and are not blocked, and that no parts
are broken or damaged. Have a damaged device re-
paired before using it. ● Switch the motor off, remove
the battery pack and make sure that all moving parts
have stopped moving:
Before cleaning or servicing the device.
Before changing accessories.
CAUTION ● Only use accessories and spare
parts which are approved by the manufacturer. Only
original accessories and original spare parts ensure that
the appliance will run fault-free and safely.
ATTENTION ● Clean the product with a soft, dry
cloth each time after use.
Note ● Service and maintenance work may only be
performed by suitably qualified and specially trained
personnel. We recommend sending the product to an
authorised service centre for repair. ● You may only
perform the adjustments and repairs described in these
operating instructions. Contact your authorised Cus-
tomer Service department for other repairs. ● Have
damaged or illegible warning signs on the device re-
placed by the authorised Customer Service department.
Safe transport and storage
WARNING ● Switch the device off, allow it to
cool down and remove the battery pack before storage
or transportation.
CAUTION ● Risk of injury and damage to the
device. Secure the device against movement or falling
down during transport.
ATTENTION ● Remove all foreign bodies from the
device before storage or transportation. ● If a knife is in-
stalled, cover it with the knife protection. ● Store the de-
vice in a dry, well ventilated location out of the reach of
children. Keep the device away from corrosive sub-
stances such as garden chemicals. ● Do not store the
device outdoors.
Residual risks
WARNING
● Certain residual risks remain present, even when the
device is operated in the prescribed manner. The fol-
lowing dangers can be present when using the de-
vice:
Severe injuries through contact with the cutting
tools. Keep the cutting tools away from your body
and below hip height. Fit the blade guard when not
using the device, also during short work breaks.
Risk of kickback when using the device with a trim-
mer knife. Always hold the device with both hands
by the handles provided. Follow the instructions for
preventing kickback as described in this manual.
Vibration can cause injuries. Use the correct tools
for the job, use the handles provided and restrict the
working time and hazard exposure time.
Noise can cause hearing injuries. Wear hearing pro-
tection and limit the duration of exposure.
Risk of injury from falling objects when using the de-
vice with a trimmer knife. Wear head protection.
Injuries due to flung objects.
Risk reduction
CAUTION
● Using the device for longer periods can cause poor
circulation in the hands due to vibrations. A general
period of use cannot be set, because this depends on
several influencing factors:
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher BCU 260-36 Bp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher BCU 260-36 Bp in the language / languages: All languages as an attachment in your email.

The manual is 26.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info