652987

Karcher Audio UR 1320BT Manual

16
Zoom out
Zoom in
Previous page
1/20
Next page
16 | EN
2. “24H“ or “12H” will be ashing in the display. Select your desired time format by pressing the
Back or Next button.
3. Conrm your selection by pressing the Clock Set button again. Now the hours are ashing.
4. Set the current hours by pressing the Back or Next button.
5. Conrm your setting by pressing the Clock Set button again. Now the minutes are ashing.
6. Set the current minutes by pressing the Back or Next button.
7. Conrm your setting by pressing the Clock Set button again. The time is now set.
Note:
• When the clock is not set, the clock display will be ashing to indicate that the time needs to be
set.
Alarm Setting
The alarm function can only work properly, if the clock is set correctly.
1. With the unit in standby mode, press and hold for 2 seconds the Alarm button.
2. The hour and “AL“ will be ashing in the display.
3. Set the desired hours by pressing the Back or Next button.
4. Conrm your setting by pressing the Alarm button again. Now the minutes are ashing.
5. Set the desired minutes by pressing the Back or Next button.
6. Conrm your setting by pressing the Alarm button again. The alarm time is now set.
Activating/Deactivating the Alarm & Alarm Mode
After you have set the alarm time, you need to activate the alarm:
1. With the unit still in standby mode, press the Alarm button once. The alarm time and “AL” will be
shown in the display. After approximately 5 seconds the display will switch back to normal clock
display, “AL” will remain in the display indicating that the alarm is active.
The buzzer will come on at the set alarm time.
2. If you would like to be woken up by radio instead of buzzer, press the Alarm button again while
the display is showing the clock and “AL”. The display will now show the set alarm time, “AL”
and a ashing “FM”. After approximately 5 seconds the display will switch back to normal clock
display, “AL” will remain in the display, while “FM” will disappear.
At the set alarm time, the unit will switch on to the last radio station played.
3. To deactivate the alarm function, you need to press the Alarm button twice if the alarm is set
to buzzer mode, or once if the alarm is set to radio mode. The set alarm time and “AL” will be
shown. After approximately 5 seconds the display will switch back to the clock display and “AL”
will disappear, indicating that the alarm is deactivated.
Note on the alarm volume:
• When buzzer is set for wake up mode, it will come on with a slowly increasing volume.
• When radio is set for wake up mode, it will come on at volume 15 if the previously set volume
during radio mode was 15 or below. If a higher volume level than 15 was set, it will come on at
this set volume.
Stopping an Active Alarm
To stop an active alarm, press the On/Standby button. The alarm will come back on the next day
at the set alarm time.
Snooze Function
The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the Snooze
button once while the alarm is active. The alarm will stop and come on again after 9 minutes.
The procedure can be repeated for approxiamtely one hour.
Sleep Function
The sleep function enables you to set a countdown timer after which the unit will turn itself into standby
mode automatically.
• At any time while the unit is operating, press and hold for 2 - 3 seconds the Sleep button to ac-
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio UR 1320BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio UR 1320BT in the language / languages: English, German as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info