652985

Karcher Audio UR 1306 Manual

16
Zoom out
Zoom in
Previous page
1/20
Next page
16 | EN
Power Supply
• Connect the power cable into a suitable wall socket.
• Make sure that the output power of the wall outlet matches the required power of the unit.
• The unit must be plugged in to operate. It does not operate on batteries.
Battery Backup Function
Two 1.5V “AAA” batteries (not included) can be installed as a backup option to maintain the time if
electrical power fails. In the event of a power outage, the time will not appear on the display, however,
the clock will continue to operate and the actual time will be maintained. The clock display will resume
once electrical power is restored if using the backup battery. The backup batteries should be replaced
as needed. Remove the batteries if the unit is not used or stored for long periods of time.
Basic Functions
Switching the Unit On & Off
1. Power the unit as described above.
2. The unit is now in standby mode. The time will be shown in the display
3. To switch the unit on, press the STANDBY button.
4. To switch the unit off into standby mode, press the STANDBY button once again.
Clock Setting
The clock can only be set while the unit is in standby mode.
1. While the unit is in standby mode, press the CLOCK SET button. The time format will be shown.
2. Select between 12h display and 24h display by pressing the / buttons. Conrm your setting
by pressing the CLOCK SET button again.
3. While the unit is in standby mode, press and hold for 2 seconds the CLOCK SET button. The
hours will start ashing.
4. Set the current hours by pressing the / buttons.
5. Press the CLOCK SET button again. The minutes will start ashing.
6. Set the current minutes by pressing the / buttons.
7. Press the CLOCK SET button again to conrm all settings. The time is now set.
Alarm Setting
An alarm can only be set while the unit is in standby mode.
This unit enables you to set 2 separate alarms. You can select to wake to CD, radio or buzzer.
1. While the unit is in standby mode, press and hold for 2 seconds the AL1 (or AL2) button.
“ALARM1” (or “ALARM2”) will be shown in the display with the hour of the selected alarm ash-
ing.
2. Set the desired hour by pressing the / buttons.
3. Press the AL1 (or AL2) button again. The minutes will start ashing.
4. Set the desired minutes by pressing the / buttons.
5. Press the AL1 (or AL2) button again to select the wake up mode.
6. Select between CD, radio (“rAd”), or buzzer (“bU”) by pressing the / buttons.
7. Press the AL1 (or AL2) button again to conrm and nish your settings.
Activating/Deactivating an Alarm
• To activate a previously set alarm, press the AL1 (or AL2) button while the unit is in standby
mode. The set alarm time will be shown and “ALARM1” (or “ALARM2”) appears in the display.
After 2 seconds the display switches back to the current time, while “ALARM1” (or “ALARM2”)
remains, indicating that the alarm is active. The selected alarm will now ring at the previously set
time.
• To deactivate a set alarm, press the AL1 (or AL2) button while the unit is in standby mode.
“ALARM1” (or “ALARM2”) will disappear from the display. This alarm is now deactivated and will
not ring.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio UR 1306 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio UR 1306 in the language / languages: English, German as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info