652983
15
Zoom out
Zoom in
Previous page
1/20
Next page
EN
EN - 15
right rmly to unlock it from the lamp holder. Make sure to use correct size and watts
when replacing the bulb.
Note: Max 60 watts light bulb (E14 medium screw type for normal or halogen energy
saving type - not included).
IF ENERGY SAVING BULB ARE USED, ONLY HALOGEN TYPE IS SUPPORTED.
WARNING: TO REDUCE THE RISK OF LIGHT BULB DAMAGE, BE CAREFUL NO TO
GRIP THE LIGHT BULB TOO TIGHTLY.
Connect the AC plug into a household outlet AC source.
5. Press the Light ON/OFF again to the ON as needed.
POWER CONNECTION
Plug the AC power cord to a householder outlet AC source. This unit is equipped with a battery
back up system, it requires a 1pc 3V “CR2032” lithium battery (not included). Insert the battery
in the battery compartment, making certain that the positive and negative (+ and -) battery
terminals are attached to the corresponding terminals on the plate in the battery compartment.
If an AC power failure occurs, the clock automatically switches to the battery power supply, the
clock and timer memory continue running. When the AC power resumes, the clock switches
back to AC again.
OPERATING INSTRUCTIONS
Setting Clock Time
With the OFF mode, press and hold the clock set / memory button; “12 Hr” will blink. Press the
Tune + or Tune – button to set the unit to the “24 Hr” mode or “12 Hr” mode. Press the Clock
set / memory button and the hours will blink. Press the Tune + or Tune – to set the current hour,
then press the clock set / memory button again the minute digits will blink. Press the Tune + or
Tune – to set the current minutes. When done and you press clock set/memory button once
again and the display time will blink to indicate the current time is set.
Setting Alarm Time
When you set the alarm, you choose the light intensity level, the type of sound and the sound
level. The alarm is set when the light ring round the ALARM button burns. The light intensity
slowly increases to the chosen level during the last 20 minutes before the set alarm time.
*For example, if you set the alarm time on 8:30 am, the light will slowly increase to max level 20
started from 8:10 am.
To preview the alarm time, press the ALARM button once.
While the display is showing the alarm time and hold the ALARM button for 3 seconds and the
hours will blink.
Press the Tune + or Tune – to set the alarm hour.
Press the ALARM button again; the minute digits will blink. Press the
Tune + or Tune – to set the alarm minutes.
Press the ALARM button and you can change the sound mode (Buzzer, Radio, Nature) for the
alarm.
Press the Tune + or Tune – to choose different sound mode.
Press the ALARM button again; the volume digits will blink, press the Tune + or Tune – to set
the alarm sound level.
Press the ALARM button again; the light digits will blink, press the Tune + or Tune – to set the
alarm light level.
Then press the ALARM button when done.
To delay the alarm, press SNOOZE, it will come on again in approx. 9 minutes. You may repeat
this cycle several times during the alarm cycle.
To stop the alarm, press ALARM button or ON/OFF button.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio UR 1205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio UR 1205 in the language / languages: English, German as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info