652981

Karcher Audio UR 1110 Manual

11
Zoom out
Zoom in
Previous page
1/20
Next page
EN
EN - 11
TO SET THE ALARM TO WAKE TO RADIO
1. Set the alarm time as previously instructed. Select a radio station and make sure the VOLUME is set
as desired.
2. Slide the ON/OFF/AUTO switch (1) to the AUTO position. When the actual time on the clock matches
the selected preset alarm time, the unit automatically turns on for 1 hour and 59 minutes and then
shuts off. The time of the porjection does not trigger the alarm.
Notes:
• To shut off the alarm, press the ALARM SET/OFF button (5) once and alarm time will be reset for the
next day. Slide the ON/OFF/AUTO switch (1) to the OFF position to turn off alarm and not set it for the
next day.
• The radio can be temporarily turned off manually by pressing the SNOOZE button (4); the radio will
turn back on automatically 9 minutes later.
TO SET THE ALARM TO WAKE TO BUZZER
1. Set the alarm time as previously instructed. Slide the VOLUME / BUZZER (11) knob to the BUZZER
position; a click is heard and the buzzer will now be activated.
2. Slide the ON/OFF/AUTO switch (1) to the AUTO position. When the actual time matches the selected
preset alarm time, the unit automatically turns on for 1 hour and 59 minutes and then shuts off.
TO SHUT ALARM OFF
To shut off the alarm, press the ALARM SET/OFF button (5) once and alarm time will be reset for the next day.
Slide the ON/OFF/AUTO switch (1) to the OFF position to turn off alarm and not set it for the next day.
SNOOZE FUNCTION
The alarm can be temporarily turned off manually by pressing the SNOOZE button (4); the buzzer will turn
back on automatically 9 minutes later.
SLEEP
1. Set the ON/OFF/AUTO switch (1) to’OFF’ or ‘AUTO’.
2. Press the Sleep Set button (7) and Minute Set button (10) together. The sleep time will be displayed
and count down from 59 minutes to zero. Release the buttons when the required sleep time is
displayed.
3. The radio will now operate until the sleep time has elapsed or may be switched off by pressing the
Snooze/Sleep Off button (4).
RADIO
The AM bands use an internal directional serial. Rotate the radio for best reception.
For best FM reception ensure that the FM cord antenna is completely uncoiled and extended.
1. Set the ON/OFF/AUTO switch (1) to ‘ON’ position.
2. Set the Wave band switch (12) to the required wave band.
3. Adjust the Tuning Control (13) to select the desired station.
4. Adjust the Volume Control (11) is required.
5. To turn off the radio, set the ON/OFF/AUTO swtich (1) to ‘OFF’ position. If the radio does not switch
off this may be caused by inadvertent operation of the Sleep Set button (7), to cancel this press the
Snooze/Sleep Off button (4) once.
SPECIFICATIONS
Frequency Range: AM 540 – 1600 kHz
FM 88 – 108 MHz
Output Power: 300 mW
Speaker Impedance: 8 ohm
Battery Backup: 9V battery (for clock)
Power Source: AC230V ~ 50 Hz, 5W
Technical specications and design may change without notice.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio UR 1110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio UR 1110 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info