652976
13
Zoom out
Zoom in
Previous page
1/16
Next page
EN
EN - 13
3. Press the CLOCK.SET button (2) again. The minute starts ashing. Select the current
minute using the buttons ◄ (1) and ► (5).
4. Press the CLOCK.SET button (2) again. The clock is now set and the time is being
displayed.
Alarm Setting
This unit enables you to set 2 different and independent alarm times.
To preview a set alarm time press one of the ALARM buttons (ALARM 1 or ALARM 2) once
while the unit is in clock display mode. After 3 seconds the display switches back to the clock
display.
1. To set an alarm, press the ALARM 1 (6) or ALARM 2 (7) button once to change the
display to alarm mode.
2. In this mode press and hold the respective ALARM button for 2 seconds to switch to
alarm setting mode. The hour starts blinking. Select the desired alarm hour using the
buttons ◄ (1) and ► (5).
3. Press the respective ALARM button again. The minute starts ashing. Select the desired
alarm minute using the buttons ◄ (1) and ► (5).
4. Press the respective ALARM button again. The alarm mode starts ashing. Select either
buzzer (“bu”) or radio using the buttons ◄ (1) and ► (5).
When selecting radio, the last set frequency will ash.
5. Press the respective ALARM button again. If you selected buzzer (“bu”) as alarm mode
the setting is nished and the display will switch back to the clock display.
When you selected radio as alarm mode, the volume starts ashing. Select the desired
radio volume using the buttons ◄ (1) and ► (5). When the alarm goes on the radio
volume will increase until it reaches the set volume.
6. Press the respective ALARM button again. The setting is nished and the display will
switch back to the clock display.
7. The ALARM indicator is lit indicating that the alarm is active.
Functions
Activating/Deactivating an Alarm
To deactivate a previously set alarm, press and hold the respective ALARM button (1 or
2) during regular clock display for 2 seconds until the alarm indicator disappears. This
alarm is now deactivated and will not ring.
To activate a previously set alarm, press and hold the respective ALARM button (1 or 2)
during regular clock display for 2 seconds until the alarm indicator appears in the display.
This alarm will now ring at the previously set time.
Stopping an Alarm
To stop an active alarm, press the respective ALARM button (1 or 2) or the On/Off button (4)
once. The alarm will stop and come back on again at the set time.
Snooze Function
The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the
Snooze button (3) once while the alarm is active. The alarm will stop and come on again after 9
minutes. To cancel this function, press the On/Off button (4) once.
Radio
Listening to the Radio
Press the On/Off button (4) to switch on the radio.
Select a desired radio station by pressing the buttons ◄ / Tune - (1) or ► / Tune + (5)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio UR 1020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio UR 1020 in the language / languages: English, German as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info