733543

Karcher Audio RR5028D Manual

23
Zoom out
Zoom in
Previous page
1/28
Next page
EN | 23
EN
1. Tune to a radio station which you would like to store.
2. Press and hold for 2 seconds the MEM/P-MODE button.
3. Select a desired preset (1 - 30) on which you want to store the current station by pressing the
or button.
4. Press the SELECT button to conrm your setting. “Stored” will be shown in the display.
5. Repeat steps 1 - 4 to store up to 30 frequencies.
6. To recall a stored frequency, press the 10/M/FOLD- or 10/M/FOLD+ buttons until you reach the
desired preset.
Alternatively, press the MEM/P-MODE button shortly, select the desired preset by pressing the
or button and then press SELECT to play.
Automatically Store Radio Stations
Rather than manually storing stations, you can also let the unit automatically store found stations:
1. While in radio mode press and hold for 2 seconds the Play/Pause button.
2. The unit will consecutively store found stations (up to 30 stations).
Once nished, the unit will play the station which was rst available.
3. To recall a stored frequency, press the 10/M/FOLD- or 10/M/FOLD+ buttons until you reach the
desired preset.
RDS (Radio Data System)
This product is equipped with an RDS decoder. RDS allows text information to be transmitted by a ra-
dio station together with the audio broadcast. This text information can include name of the radio sta-
tion, name of the current program or song, news headlines, etc. and may vary from station to station.
To display dierent info contents, repeatedly press the INFO button.
Notes:
• Not all radio stations transmit RDS information. In such cases the unit will not show any informa-
tion.
• RDS information broadcast may vary from station to station.
• If the radio signal is weak, transmission of RDS information may be disturbed or not shown
properly.
FM Menu
1. To enter the FM menu, press and hold for 2 seconds the MENU button.
2. Navigate the menu by pressing the / buttons on the remote control and enter submenus or
conrm selections by pressing the SELECT button.
3. To exit the FM menu, press and hold for 2 seconds the MENU button.
Inside the menu there are the following options:
< Scan setting > < Audio setting > < SYSTEM >
Select whether the unit should scan
for all stations or only stations with
strong signal when automatically
tuning.
When “Forced mono” is selected, all sta-
tions will be broadcast in mono mode. In
areas with weak signal, the broadcast qual-
ity may be improved by this.
Same as in DAB+ menu.
CD Player
Playing Discs
1. Switch the unit on and select the CD mode by pressing the /FUNC. button repeatedly.
2. Open the CD door carefully and insert a disc with the printed side facing up. Close the CD door
again carefully.
3. The disc is being read and the total number of tracks will then be shown in the display.
4. Playback starts automatically with the rst track.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio RR5028D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio RR5028D in the language / languages: English, German as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info