652833

Karcher Audio RR 5060 Manual

18
Zoom out
Zoom in
Previous page
1/24
Next page
18 | EN
3. Though the sound stops, the disc will continue to spin. To re-start playback, press CD PLAY/
PAUSE BUTTON again, music will start from the exact position where it was interrupted.
4. To stop CD playback, press CD STOP BUTTON once whether CD is in Play or Pause mode;
LCD DISPLAY will show total track number of the disc.
5. To turn off the unit, slide FUNCTION SWITCH to “OFF” position.
Skip and search mode
1. During play or pause mode, when CD SKIP/SEARCH FORWARD ►►| or BACKWARD |◄◄ BUT-
TON is pressed once, it will go to next track or go back to the beginning of the track.
2. During play mode, when CD SKIP/SEARCH FORWARD ►►| or BACKWARD |◄◄ BUTTON is
pressed and held, it will search the track with audible high-speed forward or backward playback.
Repeat mode
1. Repeat 1:
When MODE BUTTON is pressed once, Repeat indicator “
” will be
shown on LCD DISPLAY. This single track of music will be repeated.
2. Repeat All:
When MODE BUTTON is pressed twice, Repeat All indicator “ ” will
be shown on LCD DISPLAY. The whole disc can be played continu-
ously.
3. To cancel repeat function:
Press the MODE BUTTON repeatedly until Repeat indicator disappears
from LCD DISPLAY.
Random play mode
This feature allows tracks on the disc to be played in a random order.
1. During CD stop mode, press the MODE BUTTON three times, “RAN-
DOM” indicator will be shown on LCD DISPLAY and all music will be
played in random order automatically.
2. To cancel random play function, press the MODE BUTTON again, “RAN-
DOM” indicator will disappear from LCD DISPLAY.
Program mode
1. During CD stop mode, press PROGRAM BUTTON once. The “PRO-
GRAM” indicator and number of Program to be memorized starts from
the rst program
will light up and blink continuously.
Press CD SKIP/SEARCH FORWARD ►►| or BACKWARD |◄◄ BUTTON
to your desired musical track, LCD DISPLAY will show this appropriate track number. Press the
PROGRAM BUTTON to store this track in memory.
2. Repeat above procedure until all desired tracks have been programmed. A total of 20 tracks can
be stored into memory.
Remarks:
Whenever CD SKIP/SEARCH FORWARD ►►| or BACKWARD |◄◄
BUTTON is pressed, it will always show the last programmed track rst to
recall your memory.
After complete programming, LCD DISPLAY will show “PROGRAM_ _ _”
and ash continuously.
3. Press CD PLAY/PAUSE BUTTON once to start program playback; CD
Play indicator “►” will light up.
4. To check the program you have stored after complete programming,
press PROGRAM BUTTON once during CD stop mode; then press CD
SKIP/SEARCH FORWARD ►►| BUTTON once, LCD DISPLAY will show
Track 8 is to be repeated
Repeat All Indicator
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio RR 5060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio RR 5060 in the language / languages: English, German as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info