733573

Karcher Audio RA2050 Manual

24
Zoom out
Zoom in
Previous page
1/28
Next page
24 | EN
• To cancel or change the countdown timer, briey press the Timer button to show the remain-
ing time and press the button once again. You can now change the time using the and
buttons. Set “0” to cancel the timer.
Sleep Timer
The sleep function enables you to set a timer after which the unit will turn itself into standby mode
automatically.
• While in any playback mode, press the Sleep button on the unit or remote control repeatedly to
set the desired time.
• You can select between 90, 60, 30 or 15 minutes. “zZ” will be shown in the display.
• To check how much time is left on the set timer, press the Sleep button once.
• To cancel the sleep function, press the Sleep button repeatedly until “OFF” appears in the dis-
play. The “zZ” symbol will disappear from the display.
Radio
1. Switch the unit on as described previously.
2. Select the radio mode by pressing the Source button repeatedly in case the unit is not already in
radio mode. The frequency will be shown in the display.
3. Select a desired radio station by pressing the or button repeatedly.
4. To automatically search for the next available radio station, press and hold for 2 seconds the
or button.
Note: For a better reception completely unroll the FM wire antenna.
Manually Store Radio Stations
This unit enables you to store up to 20 radio stations:
1. Tune to a radio station which you would like to store.
2. Press the Prog button. The presets will start ashing (e.g. “P 01”).
3. Select a desired preset place from P 01 - P 20 on which you want to store the current frequency
by pressing the - Album/Preset + buttons.
4. Press the Prog button again to conrm your setting.
5. Repeat steps 1 - 4 to store up to 20 frequencies.
6. To recall a stored frequency, press the - Album/Preset + buttons until you reach the desired
preset.
Automatically Store Radio Stations
Rather than manually storing stations, you can also let the unit automatically store found stations:
1. While in radio mode press and hold for 2 seconds the Prog button.
2. “AUTO” will be shown in the display and the unit will consecutively store found stations (up to 20
stations).
Once nished, the unit will play the station which was rst available.
3. To recall a stored frequency, press the - Album/Preset + buttons until you reach the desired
preset.
RDS (Radio Data System)
This product is equipped with an RDS decoder. RDS allows text information to be transmitted by a ra-
dio station together with the audio broadcast. This text information can include name of the radio sta-
tion, name of the current program or song, news headlines, etc. and may vary from station to station.
When you have tuned into a radio station that is broadcasting RDS information, the RDS symbol
will be shown in the display.
This unit supports the following RDS modes which may be selected by repeatedly pressing the Disp
button:
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio RA2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio RA2050 in the language / languages: English, German as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info