652968
16
Zoom out
Zoom in
Previous page
1/20
Next page
16 | EN
Volume Setting
To increase the volume, press the VOL+ button.
To decrease the volume, press the VOL- button.
Radio
1. Switch the unit on as described previously.
2. Press the FUNCTION button repeatedly to select radio mode “tun”. The frequency will be shown
in the display.
3. Select a desired radio station by pressing the or button repeatedly.
4. To automatically search for the next available radio station, press and hold for 2 seconds the
or button.
5. For the best reception fully extend the FM antenna.
Radio Station Presets
This unit enables you to store up to 20 radio stations.
1. Tune to a radio station which you would like to store.
2. Press and hold for 2 seconds the PRE-UP/+10/PRO button. The presets will start ashing (e.g.
“P01”).
3. Select a desired preset place from P01 - P20 on which you want to store the current frequency by
pressing the or button.
4. Press the PRE-UP/+10/PRO button again to conrm your setting.
5. Repeat steps 1 - 4 to store up to 20 frequencies.
6. To recall a stored frequency, repeatedly press the PRE-UP/+10/PRO button until you reach the
desired preset.
Notes:
If the unit is disconnected from the power supply or batteries are removed, the radio station
memory will be erased.
A preset station can be overwritten by storing another frequency on that preset.
MP3 Playback via USB or SD
This unit is equipped with a USB socket and SD/MMC card
reader which can accept and play MP3 les stored on stan-
dard USB ash drives and SD or MMC storage cards.
1. While the unit is in standby mode insert a suitable USB
ash drive or SD card into the USB port or SD card
reader on the unit.
2. Switch the unit on and select either the USB mode
(“USb“) or SD mode (“Sd“) by pressing the FUNCTION
button repeatedly.
3. The USB ash drive or SD card will be read and the
total number of tracks will be shown in the display.
4. Playback starts automatically once the USB ash drive or SD card is read. If not, press the PLAY/
PAUSE button to start the playback.
5. To temporarily stop the playback (pause), press the PLAY/PAUSE button once. The display
will be ashing. Press the button again to resume playback.
6. To stop playback, press the STOP ■ button.
Fast Forward / Fast Rewind & Skipping Tracks
To jump to the previous track, press the button once.
To skip to the next track, press the button once.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio RA 2600BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio RA 2600BT in the language / languages: English, German as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info