652951

Karcher Audio MC 6570 Manual

10
Zoom out
Zoom in
Previous page
1/40
Next page
10 | DE
NETZANSCHLUSS
• Dieses Gerät wird über ein externes Netzteil mit DC 12V, 2,5A betrieben. Siehe
Abb. rechts.
• Verwenden Sie ausschließlich das mitgelieferte Netzteil. Andere Netzteile
können zu Beschädigungen am Gerät führen.
• Verbinden Sie den kleinen Stecker des Netzteils mit dem Netzanschluss an der Geräteseite.
• Versichern Sie sich, dass die Ausgangsleistung der Wandsteckdose mit der am Gerät, bzw. dem
Netzadapter angegebenen Spannung übereinstimmt.
• Verbinden Sie den Netzstecker mit einer geeigneten Steckdose.
• Drücken Sie die Taste „ON/STANDBY“, um das Gerät einzuschalten.
• Um das Gerät vollständig auszuschalten, ziehen Sie den Netzstecker aus der Steckdose.
• Im Standby-Modus ist die blaue Hintergrundbeleuchtung des Displays gedimmt und die Uhrzeit
wird angezeigt.
• Um das Gerät aus dem Standby-Modus einzuschalten, drücken Sie die Taste „STANDBY/ON“
am Gerät oder auf der Fernbedienung.
INTELLIGENTES ENERGIESPARSYSTEM
• Das Gerät verfügt über ein Energiesparsystem, welches das Gerät automatisch in den Standby-
Modus schaltet, wenn dieses nicht verwendet wird.
• Das Gerät schaltet in den folgenden Fällen automatisch nach 10-15 Minuten in den Standby-
Modus:
(A) CD-Modus: Die Wiedergabe der Disk ist beendet.
(B) AUX-Modus: Es wird kein Eingangssignal vom AUX-Eingang erkannt.
(C) USB-Modus: Die Wiedergabe von USB wurde beendet.
(D) SD-Modus: Die Wiedergabe von SD wurde beendet.
• Um das Gerät nachdem es automatisch in den Standby-Modus geschaltet hat wieder einzuschal-
ten, drücken Sie die Taste „ON/STANDBY“.
ANSCHLIESSEN DER LAUTSPRECHER
• Wickeln Sie die Kabel beider Lautsprecher ab.
• Beachten Sie, dass jeder Lautsprecher über 2 Kabel verfügt: Ein klares und eines mit einem
schwarzen Streifen.
• Verbinden Sie das klare Kabel des linken Lautsprechers mit dem roten (+) Lautsprechereingang
(Markierung „L“) am Gerät.
• Verbinden Sie das Kabel mit dem schwarzen Streifen des linken Lautsprechers mit dem schwar-
E-7
REMOTE CONTROL HANDSET
LOCATION OF REMOTE CONTROL KEYS
1. ON/ STANDBY BUTTON
2. SNOOZE KEY
3. MUTE KEY
4. TIMER KEY
5. SLEEP KEY
6. id3/ FM MODE KEY
7. BAND/ FOLDER UP KEY
8. EQ KEY
9. FOLDER DOWN KEY
10. 3CD PLAY MODE KEY
11. MP3/ RDS SEARCH KEY
12. DISC 1 SELECT KEY
13. DISC 2 SELECT KEY
14. DISC 3 SELECT KEY
15. DISC 1 OPEN/ CLOSE KEY
16. DISC 2 OPEN/ CLOSE KEY
17. DISC 3 OPEN/ CLOSE KEY
18. USB/ CARD KEY
19. TUN
ER KEY
20. AUX KEY
21. RANDOM/ MEMORY ( ) KEY
22. PROGRAM/ CLOCK ADJUST KEY
23. REPEAT/ MEMORY ( ) KEY
24. CD PLAY/ PAUSE KEY
25. BACK/ TUNE DOWN KEY
26. NEXT/ TUNE UP KEY
27. STOP/ RDS MODE KEY
28. VOLUME UP ( )KEY
29. VOLUME DOWN ( ) KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16 17
18
19 20
21 22
23
24
25 26
27
28
29
AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)
- THIS SET IS EQUIPPED WITH A "DC-JACK" CAPABLE OF ACCEPTING AC-ADAPTORS
WITH A RATING OF DC = 12V, 5A, AND WITH A PLUG WITH THE FOLLOWING
POLARITIES AS SHOWN (CENTER POSITIVE) :
- PLEASE USE ONLY THE SUPPLIED AC-ADAPTOR TO OPERATE THE UNIT.
USE OF OTHER ADAPTORS MAY DAMAGE THE UNIT OR CAUSE IT TO MALFUNCTION.
- PLUG THE TAIL END OF THE AC-ADAPTOR INTO THE DC-JACK (SOCKET) ON
THE SIDE OF THE MAIN UNIT.
- MAKE SURE THE VOLTAGE OF THE AC ADAPTOR O
PERATES AT THE SAME VOLTAGE
AS YOUR LOCAL HOUSEHOLD VOLTAGE.
- INSERT THE PLUG AT THE END OF THE POWER CORD INTO THE WALL AC SOCKET.
- PRESS THE "ON/ STANDBY" KEY TO SWITCH ON THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED "OFF".
IT WILL EITHER BE "ON" OR IN "STANDBY MODE".
- IN STANDBY MODE, THE BLUE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE DIMMED
BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).
- ANYTIME DURING STANDBY MOD
E, YOU CAN SWITCH "ON" THE UNIT BY PRESSING
THE "ON/ STANDBY" KEY (ON REMOTE CONTROL OR FRONT PANEL OF THE MAIN UNIT).
- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE.
-
+
POWER SUPPLY
- OPEN THE BATTERY DOOR AT THE REAR OF UNIT.
- INSERT 2 PCS "AA-CELL" (UM-3/LR6 TYPE) BATTERIES IN THE BATTERY COMPARTMENT. THESE
2 BATTERIES ARE FOR BACKUP OF THE "REAL TIME CLOCK" AND "RADIO MEMORY PRESET
STATIONS" DURING BRIEF POWER OUTAGES. PLEASE OBSERVE THE CORRECT POLARITIES
OR THE MEMORY WILL NOT BE PROPERLY MAINTAINED.
BACK UP BATTERIES
CONNECTION OF SPEAKER BOXES
- UNWRAP THE SPEAKER-CORDS OF BOTH SPEAKER-BOXES.
- PLEASE NOTICE THAT EACH SPEAKERS CORD CONSISTS OF 2 WIRES, ONE IS "CLEAR"
AND ONE HAS A BLACK LINE.
- INSERT THE "CLEAR" WIRE OF THE LEFT SPEAKER-BOX INTO THE "RED" ( + ) SPEAKER
TERMINAL ON THE RIGHT SIDE OF THE MAIN-UNIT, WHICH HAS THE "L" INDICATION
(NEXT TO THE SPEAKER-CONNECTOR).
- INSERT THE "BLACK" WIRE OF THE LEFT SPEAKER-BOX INTO THE
"BLACK" ( - ) SPEAKER
TERMINAL, WHICH HAS THE "L" INDICATION (NEXT TO THE
SPEAKER-CONNECTOR).
- REPEAT THE ABOVE 2 STEPS FOR THE "RIGHT" SPEAKER BOX, BUT THIS TIME, INSERTING THEM
INTO THE RED & BLACK TERMINALS WHICH HAVE THE "R" INDICATION.
- WHEN INSERTING EACH WIRE INTO A TERMINAL, PRESS DOWNWARDS ON THE PLASTIC KNOB
(RED OR BLACK PART) & PUSH THE EXPOSED METAL END OF THE WIRE ALL THE
WAY INTO THE HOLE ADJACENT TO THIS KNOB.
- PLACE THE SPEAKER BOXES AS FAR APART AS POSSIBLE FOR BEST POSSIBLE ACOUSTIC EFFECT.
FERNBEDIENUNG
1. ON/STANDBY-Taste
2. SNOOZE-Taste
3. MUTE-Taste
4. TIMER-Taste
5. SLEEP-Taste
6. ID3/FM MODE-Taste
7. FOLDER UP-Taste
8. EQ-Taste
9. FOLDER DOWN-Taste
10. 3 CD PLAY MODE-Taste
11. REPEAT/RANDOM-Taste
12. DISC 1 SELECT-Taste
13. DISC 2 SELECT-Taste
14. DISC 3 SELECT-Taste
15. DISC 1 OPEN/CLOSE-Taste
16. DISC 2 OPEN/CLOSE-Taste
17. DISC 3 OPEN/CLOSE-Taste
18. USB/CARD-Taste
19. TUNER-Taste
20. AUX-Taste
21. MEMORY (-) Taste
22. PROGRAM / CLOCK ADJUST-Taste
23. MEMORY (+) Taste
24. CD PLAY/PAUSE-Taste
25. BACK/TUNE DOWN-Taste
26. NEXT/TUNE UP-Taste
27. STOP-Taste
28. VOLUME UP (+) Taste
29. VOLUME DOWN (-) Taste
E-7
REMOTE CONTROL HANDSET
LOCATION OF REMOTE CONTROL KEYS
1. ON/ STANDBY BUTTON
2. SNOOZE KEY
3. MUTE KEY
4. TIMER KEY
5. SLEEP KEY
6. id3/ FM MODE KEY
7. BAND/ FOLDER UP KEY
8. EQ KEY
9. FOLDER DOWN KEY
10. 3CD PLAY MODE KEY
11. MP3/ RDS SEARCH KEY
12. DISC 1 SELECT KEY
13. DISC 2 SELECT KEY
14. DISC 3 SELECT KEY
15. DISC 1 OPEN/ CLOSE KEY
16. DISC 2 OPEN/ CLOSE KEY
17. DISC 3 OPEN/ CLOSE KEY
18. USB/ CARD KEY
19. TUN
ER KEY
20. AUX KEY
21. RANDOM/ MEMORY ( ) KEY
22. PROGRAM/ CLOCK ADJUST KEY
23. REPEAT/ MEMORY ( ) KEY
24. CD PLAY/ PAUSE KEY
25. BACK/ TUNE DOWN KEY
26. NEXT/ TUNE UP KEY
27. STOP/ RDS MODE KEY
28. VOLUME UP ( )KEY
29. VOLUME DOWN ( ) KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15 16 17
18
19 20
21 22
23
24
25 26
27
28
29
AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)
- THIS SET IS EQUIPPED WITH A "DC-JACK" CAPABLE OF ACCEPTING AC-ADAPTORS
WITH A RATING OF DC = 12V, 5A, AND WITH A PLUG WITH THE FOLLOWING
POLARITIES AS SHOWN (CENTER POSITIVE) :
- PLEASE USE ONLY THE SUPPLIED AC-ADAPTOR TO OPERATE THE UNIT.
USE OF OTHER ADAPTORS MAY DAMAGE THE UNIT OR CAUSE IT TO MALFUNCTION.
- PLUG THE TAIL END OF THE AC-ADAPTOR INTO THE DC-JACK (SOCKET) ON
THE SIDE OF THE MAIN UNIT.
- MAKE SURE THE VOLTAGE OF THE AC ADAPTOR O
PERATES AT THE SAME VOLTAGE
AS YOUR LOCAL HOUSEHOLD VOLTAGE.
- INSERT THE PLUG AT THE END OF THE POWER CORD INTO THE WALL AC SOCKET.
- PRESS THE "ON/ STANDBY" KEY TO SWITCH ON THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED "OFF".
IT WILL EITHER BE "ON" OR IN "STANDBY MODE".
- IN STANDBY MODE, THE BLUE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE DIMMED
BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).
- ANYTIME DURING STANDBY MOD
E, YOU CAN SWITCH "ON" THE UNIT BY PRESSING
THE "ON/ STANDBY" KEY (ON REMOTE CONTROL OR FRONT PANEL OF THE MAIN UNIT).
- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE.
-
+
POWER SUPPLY
- OPEN THE BATTERY DOOR AT THE REAR OF UNIT.
- INSERT 2 PCS "AA-CELL" (UM-3/LR6 TYPE) BATTERIES IN THE BATTERY COMPARTMENT. THESE
2 BATTERIES ARE FOR BACKUP OF THE "REAL TIME CLOCK" AND "RADIO MEMORY PRESET
STATIONS" DURING BRIEF POWER OUTAGES. PLEASE OBSERVE THE CORRECT POLARITIES
OR THE MEMORY WILL NOT BE PROPERLY MAINTAINED.
BACK UP BATTERIES
CONNECTION OF SPEAKER BOXES
- UNWRAP THE SPEAKER-CORDS OF BOTH SPEAKER-BOXES.
- PLEASE NOTICE THAT EACH SPEAKERS CORD CONSISTS OF 2 WIRES, ONE IS "CLEAR"
AND ONE HAS A BLACK LINE.
- INSERT THE "CLEAR" WIRE OF THE LEFT SPEAKER-BOX INTO THE "RED" ( + ) SPEAKER
TERMINAL ON THE RIGHT SIDE OF THE MAIN-UNIT, WHICH HAS THE "L" INDICATION
(NEXT TO THE SPEAKER-CONNECTOR).
- INSERT THE "BLACK" WIRE OF THE LEFT SPEAKER-BOX INTO THE
"BLACK" ( - ) SPEAKER
TERMINAL, WHICH HAS THE "L" INDICATION (NEXT TO THE
SPEAKER-CONNECTOR).
- REPEAT THE ABOVE 2 STEPS FOR THE "RIGHT" SPEAKER BOX, BUT THIS TIME, INSERTING THEM
INTO THE RED & BLACK TERMINALS WHICH HAVE THE "R" INDICATION.
- WHEN INSERTING EACH WIRE INTO A TERMINAL, PRESS DOWNWARDS ON THE PLASTIC KNOB
(RED OR BLACK PART) & PUSH THE EXPOSED METAL END OF THE WIRE ALL THE
WAY INTO THE HOLE ADJACENT TO THIS KNOB.
- PLACE THE SPEAKER BOXES AS FAR APART AS POSSIBLE FOR BEST POSSIBLE ACOUSTIC EFFECT.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio MC 6570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio MC 6570 in the language / languages: English, German as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info