652949
26
Zoom out
Zoom in
Previous page
1/36
Next page
26 | EN
5. After adjusting “TIMER ON”, “
OFF” appears on the display and the HOUR digit ashes (F2).
6. Repeat the above steps 2 to 3, and then press the TIMER button once more to conrm and order
TIMER OFF time.
7. Now the “TUNER” appears on the display with ashing, and then select the alarm mode of the
“TUNER, CD, USB, CARD or iPod “ by pressing the SKIP/TUNE SEARCH (UP or DOWN) but-
ton.
8. Press the TIMER button again. The timer “VOL” indicator appears on the display and ashes.
Adjust the timer volume high or low by pressing the SKIP/TUNE SEARCH (UP or DOWN) button.
9. Each enable state as shown above will be cleared if the button is not pushed in 10 seconds.
10. After adjusting “TIMER ON” and “TIMER OFF”, press the TIMER button, “ “ appears on the
display.
11. The main unit will be switched on automatically at “TIMER ON” order and start playing, the main
unit will be switched off automatically at “TIMER OFF” order.
Note: If the display shows “ERROR” while you set the “TIMER ON” it means both, “TIMER ON” and
“TIMER OFF”, are the same. In this case, please go to “TIMER OFF” to set the off time rst.
FUNCTION SELECT
When pressing the FUNCTION button the unit switches between its functions in the following order:
RADIO OPERATION
1. Press the FUNCTION button on the main unit (or remote control) to select the TUNER mode and
FM operation.
2. Select the desired frequency with the SKIP/TUNE SEARCH(UP or DOWN) button on the main
unit (or remote control).
MONO/ STEREO SELECT
This unit can receive FM frequency.
1. When you want to select FM stereo station, press the ID3/MONO/ST. button once on the remote
control only. The “ “ indicator will appear on the display that the reception is at its best.
2. When you press the ID3/MONO/ST. button once again, the FM STEREO indicator will turn off &
switch to MONO FM status.
Automatic Tuning
1. Press the SKIP/TUNE SEARCH (UP or DOWN) button for a few seconds, then release the but-
ton. The tuner will automatically search the rst station of sufcient signal strength.
2. Repeat above procedure if you wish to select another station.
Programming preset stations
You can also preset stations of your choice and store up to 30 FM stations in its memory.
1. Tune to the required station.
2. Press the iPod/MEM/CLOCK-ADJ button.
3. Press the PRESET/FOLDER(UP or DOWN) button for your desired station number.
4. Press the iPod/MEM/CLOCK-ADJ again to conrm your selection.
5. To program more stations into the memory, repeat the above steps 2 to 4.
6. To change the stored preset stations, repeat the above steps 2 to 4.
Notes:
Storing a new station into a preset location will erase the previously stored station in that location.
To erase all preset memory press and hold the PLAY/PAUSE button while the unit is in STANDBY
mode.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio MC 6555i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio MC 6555i in the language / languages: English, German as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info