652944
21
Zoom out
Zoom in
Previous page
1/28
Next page
EN | 21
EN
Preparation of Remote Control
Remove (gently pull out) the plastic tab from the battery compartment at the rear of the remote
control.
Test the remote control by pointing it towards the remote control sensor on the unit and pressing
the On/Standby key to check that the unit switches on properly using the remote control.
Digital Clock Function
The set has a built-in digital clock, which is displayed when the set is in “standby mode”. In this situa-
tion the blue backlight is normally dimmed.
Setting the Time
1. Switch the unit to stand-by mode.
2. Press & hold the CLOCK SET button for 3 seconds. The display now shows
12
24
hour or
12
24
hour
(ashing).
3. Press TUNE UP or TUNE DOWN to select 12-hour or 24-hour clock display format and
press the CLOCK SET button to conrm your selection.
4. Press TUNE UP or TUNE DOWN repeatedly to set the correct hour in the display and
press CLOCK SET to conrm.
5. Press TUNE UP or TUNE DOWN repeatedly to set the correct minute in the display and
press CLOCK SET to conrm.
6. Correct time is now set and will be shown in the display.
Note:
When the digital clock is not set, the digital clock display is continuously ashing to indicate that
the correct time has not yet been set.
Automatic Power On/Off Timer Function
This set has a timer function to enable you to program the unit to automatically switch “on” or “off” at
preset times. This is useful as a morning alarm clock:
Setting the Timer
1. Press and hold TIMER key (on remote control). The “TIMER ON” symbol appears in the display.
2. Press TUNE UP or TUNE DOWN to adjust the hour of the desired “on” time and then
press TIMER key to conrm.
3. Press TUNE UP or TUNE DOWN to adjust the minutes of the desired “On” time and then
press TIMER key to conrm.
4. Now the wording in the display changes to show “TIMER OFF”.
5. Press TUNE UP or TUNE DOWN keys to adjust the hour of the desired “Off” time and then
press TIMER to conrm.
6. Press TUNE UP or TUNE DOWN to adjust the minutes of the desired “Off” time and then
press TIMER to conrm.
7. Now the display will indicate the “Wake Up Mode” (Tuner, CD, USB or Card). Press TUNE UP
to choose the desired mode an press TIMER to conrm.
8. The display then shows the “Wake Up Volume Level” (loudness). Press TUNE UP or
TUNE DOWN to increase or decrease the volume level to be used for the music to be played
when the timer switches on the unit at the preset time.
9. Press TIMER to conrm.
10. Finally the display will cycle through all settings and then the unit will return to the normal display,
except that the symbol will be shown, to indicate that you have programmed an On/Off Alarm
setting.
11. In case you wish to disable the timer, press the TIMER key once and the symbol will disap-
pear.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio MC 6430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio MC 6430 in the language / languages: English, German as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info