652940

Karcher Audio KA 5300 Manual

21
Zoom out
Zoom in
Previous page
1/28
Next page
EN | 21
EN
MEMORY/CLK-ADJ In standby mode: Enter clock setting mode.
In radio mode: To preset radio stations.
MODE To review and set the alarm on/off time.
RDS SEARCH In radio mode: Press to select the RDS program
type for searching.
Connection
1. Connect the power cord to a suitable wall outlet. Make sure that the power output of the wall
outlet matches the required power supply as indicated on the unit.
2. When you rst plug the unit into the mains, the unit will go into standby mode.
3. Connect the speaker wires to the speaker terminal located on the back of the unit.
4. Turn on the unit by pressing the POWER button.
Basic Functions
Clock Setting
The clock can only be set while the unit is in standby mode.
1. While the unit is in standby mode, press the MEM/CLK-ADJ button. The hour is blinking. Set the
current hour by pressing the or button. Press the MEM/CLK-ADJ button again to conrm
your setting. The minutes are blinking now.
2. Set the current minutes by pressing the or button. Press the MEM/CLK-ADJ button again
to conrm your setting.
3. To select between 12h and 24h display, press and hold the CD STOP button.
Note:
• The set time will be reset if the unit is disconnected from the power supply.
Timer Setting (via Remote Control)
This function enables you to set a timer to wake up by CD or radio.
With the unit in standby mode press the MODE button on the remote control repeatedly to show the
following information in the display:
1. Current time
2. On Time Setting Press the MEM/CLK-ADJ button followed by the SKIP+/- buttons to set the
hour of the on time. Press the MEM/CLK-ADJ button again, followed by the
SKIP+/- buttons to set the minutes of the on time. Press the MEM/CLK-ADJ
button to conrm your setting.
3. Off Time Setting Press the MEM/CLK-ADJ button followed by the SKIP+/- buttons to set the
hour of the off time. Press the MEM/CLK-ADJ button again, followed by the
SKIP+/- buttons to set the minutes of the off time. Press the MEM/CLK-ADJ
button to conrm your setting.
4. Mode Press the MODE button to enter the wake up mode. Press the MEM/
CLK-ADJ button followed by the SKIP+/- buttons to set the mode (CD or
TUNER). Press the MEM/CLK-ADJ button to complete your settings.
Note:
• The programming will automatically be cancelled if no button is pressed within about 10 seconds.
Activating/Deactivating the Timer
1. Press the TIMER button once. The timer symbol
will appear in the display. The timer is now
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio KA 5300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio KA 5300 in the language / languages: English, German as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info