733565

Karcher Audio GEEN040 Manual

25
Zoom out
Zoom in
Previous page
1/28
Next page
EN | 25
EN
2. Using the DN/F-R or UP/F-F buttons, select the track to be played rst in the sequence.
3. Press the PRESET button again. “P02” will be ashing in the display.
4. Repeat the steps 2 - 3 to select up to 20 tracks (or 99 tracks) for your sequence.
5. Press the PLAY/PAUSE button to start the playback of your sequence.
6. Fast Forward, Fast Rewind, Skipping Tracks and Repeat Modes can be used as described
before.
7. To stop playback, press the STOP button. To delete your sequence press this button a second
time.
USB Playback
1. Turn the unit on as described above and select USB mode by pressing the FUNCTION button.
2. Insert a USB stick into the USB socket of the unit.
3. The content will be read and playback will start automatically. If no USB is inserted, “NO” will be
shown in the display.
4. Adjust the volume by turning the VOLUME knob to the desired sound level.
5. To temporarily stop the playback (pause), press the PLAY/PAUSE button once. Press the button
again to resume playback.
6. To stop playback, press the STOP button.
Playback modes
Skipping, fast forwarding and fast rewinding tracks, repeat modes and random function in USB mode
are the same as for CD playback.
Notes:
• A USB device must always be connected directly to the USB port of this product. The use of a
USB extension cord is not supported by this product. The USB port of this product cannot com-
municate with a computer directly.
• The reading time for a USB drive varies depending on the speed of the memory device and the
number of songs and folders. In some cases the reading time may be as long as 60 seconds.
• Always switch off the unit before removing a USB ash drive to prevent damage to your USB
device. The manufacturer is not responsible for the loss or damage of data.
• Due to numerous methods of compression it could be that some les or USB ash drives cannot
be played.
Record Player
1. Turn the unit on as described above and select AUX/PHONO mode by pressing the FUNCTION
button (the display will show “AUX” in large and “PHONO” in the top right corner).
2. Make sure you have removed the stylus cover from the stylus.
3. Place a record on the center spindle.
4. Set the turntable speed selector to the appropriate speed (33, 45 or 78 RPM). If you are playing
45 RPM singles, place the 45 RPM adapter on the center spindle.
5. Release the tone arm lock.
6. Using the cue lever raise the tone arm off its rest and gently move the tonearm towards the
record. The turntable will start turning.
7. Carefully move the tone arm over the record and lower it at the desired spot using the cue lever.
8. Adjust the volume by turning the VOLUME knob to the desired sound level.
9. When the turntable nishes playing, the tone arm will return to its rest automatically!
10. If you want to stop playback before the record reaches its end, carefully lift up the tone arm using
the cue lever and gently move the tone arm above its rest. Lower the tone arm using the cue
lever.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio GEEN040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio GEEN040 in the language / languages: English, German as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info