733561
19
Zoom out
Zoom in
Previous page
1/24
Next page
EN | 19
EN
5. Set the current minute by pressing the Skip Down | or Skip Up ►►| button. Press the MEM/
CLK-ADJ button again. The time is now set.
Notes:
The clock setting mode will automatically quit in case there is no button pressed within 5 seconds
after pressing the MEM/CLK-ADJ button.
The set time will be deleted if the unit is disconnected from the power supply. In such a case you
need to reset the clock.
Alarm Clock Setting (via remote control)
This unit enables you to set an alarm. You can select to wake to CD, USB, SD or radio.
1. To set an alarm, press and hold for 2 seconds the ALARM button on the remote control. The
symbol and the hour of the alarm will ash.
2. Set the desired hour by pressing the Skip Down | or Skip Up ►►| button.
3. Press the ALARM button again. The minutes will start ashing.
4. Set the desired minutes by pressing the Skip Down | or Skip Up ►►| button.
5. Press the ALARM button again to select the wake up mode.
6. Select between CD, USB, SD or TUNER by pressing the Skip Down | or Skip Up ►►| button.
7. Press the ALARM button again to set the wake up volume.
8. Set the desired wake up volume by pressing the Skip Down | or Skip Up ►►| button.
9. Press the ALARM button again. The alarm is now set.
Activating/Deactivating an Alarm
To activate a previously set alarm, press the ALARM button once.
The alarm symbol appears in the display. The alarm will now ring at the previously set time.
To deactivate a set alarm, press the ALARM button once. The alarm symbol will disappear
from the display. The alarm is now deactivated and will not ring.
Stopping an Active Alarm
When the alarm is sounding, press either the ON/STANDBY I/ button or the ALARM button to
turn it off. The alarm will sound again at the set time on the next day.
Snooze (via remote control)
The snooze function allows you to delay an active alarm for 9 minutes. To do so, press the SNOOZE
button once while the alarm is active. The alarm will stop and come on again after 9 minutes.
“SNOOZE” will be shown in the display during this period. To turn off this function, press the ALARM
button.
Sleep Function (via remote control)
The sleep function enables you to set a countdown timer after which the unit will turn itself into standby
mode automatically.
1. While listening to any mode, repeatedly press the SLEEP button on the remote control to select a
desired countdown after which the unit will turn itself into standby automatically.
2. You can select 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes. “ZZZ” will be shown in the display.
3. If you want to cancel the function, press the SLEEP button repeatedly until “SLP-OFF” appears in
the display. “ZZZ” will disappear from the display.
Volume Setting
You can set the volume by pressing the VOL+/VOL- buttons on the remote control.
You can also set the volume by rotating the volume knob on the fron of the unit. Turn the knob
clockwise to increase the volume, and counter-clockwise to decrease the volume. Only turn the
knob until you hear a clicking noise. Do not overturn the volume knob as this may lead to dam-
age.
Mute Function
There are two ways to mute the volume:
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio GEEN030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio GEEN030 in the language / languages: English, German as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info