733548
17
Zoom out
Zoom in
Previous page
1/20
Next page
EN | 17
EN
Station Order Change the order of the stations listed in the station list.
Equalizer Select between different equalizer presets.
Backlight Set the display backlight brightness (High / Medium / Low) in ON mode and
set the duration of timeout (time after which the display backlight will automatically
dim its brightness to a low level while in standby mode).
Time/Date Time and date are set automatically through DAB+ signal by default. If you wish to
set time and date manually, however, you can do so under this menu option.
Set Format: Select between 12 hour or 24 hour display mode.
Auto Update: Select whether time/date should be set automatically from DAB+ or
FM/RDS signal (suggested) or not (manual setting required).
Alarms Enter to set the alarm(s).
Alarm Mode: Select between Off/Daily/Once/Weekends/Weekdays.
Alarm Time: Set the desired alarm time.
Alarm Sound: Select between Buzzer, DAB or FM for wake up source.
Alarm Volume: Set the desired alarm volume.
Press BACK to save the alarm setting. The display will show a clock icon.
To turn off an active alarm, press the
or ALARM button.
Snooze: When you press any button (except ) during an active alarm, it will
activate the snooze function. Rotate the NAVIGATION knob to select a snooze
duration (5, 10, 15, or 30 minutes) after which the alarm will sound again.
To cancel the snooze function and stop the alarm, press .
Sleep The sleep function enables you to set a timer after which the unit will turn itself into
standby mode automatically. Select the desired time under this menu option.
Factory Reset Select to reset the unit to its factory settings. All user settings will be lost!
Info View the version of the rmware.
Language Select OSD menu language.
6. DAB+
1. Switch the unit on as described previously. It will start in the mode last listened to. Select DAB+
mode if it isn’t already selected.
2. A full scan for available stations will be done when you switch into DAB+ mode for the rst time. A
full scan can be done at any time in the menu.
3. You can select a desired station using the ▲/TUNING+ / /TUNING- buttons and then pressing
OK.
Display
Content of the display depends on the broadcast of the radio station selected.
Press the INFO button repeatedly to cycle through information broadcast by the selected radio
station, such as artist/track info, programme info, as well as frequency, signal strength, bite rate,
code, etc.
If there is a picture shown from the radio station (slide) you can press OK to enlarge it to ll the
display. Press OK again to return to normal view.
Radio Station Presets
This unit enables you to store up to 10 of your favorite radio stations:
1. Select a radio station which you would like to store.
2. Press and hold for 2 seconds the PRESET button.
3. Select the preset no. on which the station should be stored using the ▲/TUNING+ / /TUNING-
buttons or the NAVIGATE knob on the unit.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher Audio DAB3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher Audio DAB3000 in the language / languages: English, German as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info