75888
9
Zoom out
Zoom in
Previous page
1/116
Next page
Deutsch 5
Î The filling level of the filter bag depends
on the dirt that is sucked in.
The filter bag needs to be replaced more
frequently while sucking in fine dust, sand,
etc.
Î Use a preliminary separator while sucking
in ash or rust particles (order no. 2.863-
139).
Illustration
Î Insert the hard surface inlay into the floor
nozzle. The bristles should point towards
the front.
Î Press both the locking flaps inwards.
Î Remove the hard-surface insert.
Use this function, for example, to blow out
leaves or dust from the garage, hobby room,
work shop, courtyard or garden.
Illustration
Î Connect connection hose. Open the slide
of the air regulation, and select the de-
sired blowing performance.
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes the
suction opening and the appliance works at a
higher speed. Switch off the appliance imme-
diately and empty the container.
Further, for A 2236 X pt:
Illustration
Electric power tools with a power consump-
tion of 100-2100 W can be connected.
(CH: 100 - 1100 W, UK: 100 - 1800 W)
Î A) Plug the enclosed adapter onto the
suction hose and connect the electric tool
with the connection.
or
Î B) Use hose Flex-Tool; attach the thicker
end directly to the surction hose and the
other end on the enclosed adapter and
connect it to the electric tool.
Illustration
Î Connect the mains plug of the electric
power tool to the vacuum cleaner.
Î Switch the vacuum cleaner to Position II
and start working.
Note: The suction turbine starts with a de-
lay of 0.5 seconds after the electric tool
has been switched on. After the electric
tool has been switched off, the suction tur-
bine will continue to run for approx. 5 sec-
onds to suck in the remaining dirt from the
suction hose.
Î Turn off the appliance and disconnect the
mains plug.
Empty the container
Illustration
Î Press the unlocking mechanism by foot
and remove the vacuuming device from
the chassis.
Illustration
Î Remove the motor casing and empty the
container.
Î Insert the vacuuming device in the chas-
sis - the container is self-locking.
Storing the Appliance
Illustration
Î Place the accessories in the appropriate
compartments at the appliance and store
the appliance in a dry room.
Î The large wheels facilitate transportation
on stairs; hold the device at the transport
handle while doing so.
Note: Never transport the device at the
handle of the vacuuming device; risk of
tilting!
Î The device is to be fastened properly be-
fore transporting the device in the car.
Note: We recommend that you first re-
move the vacuuming device from the
chassis.
Vacuuming hard surfaces
Vacuuming carpeted floors
Blowing function
Wet vacuum cleaning
Working with electrical power tools
Finish operation
Transporting the device
English 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher A 2236 X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher A 2236 X in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info