72002

Karcher A 2234 PT Manual

9
Zoom out
Zoom in
Previous page
1/116
Next page
English 9
Illustration
A 2534 pt / A 2574 pt
:
Use your foot to press the reversing switch of the
floor nozzle. The brush strips at the bottom of
the floor nozzle are extended.
A 2234 pt
:
Insert the hard surface inlay into the floor nozzle.
The bristles should point towards the front.
A 2534 pt / A 2574 pt
:
Use your foot to press the reversing switch of the
floor nozzle. The brush strips at the bottom of
the floor nozzle are retracted.
A 2234 pt
:
Work without the hard surface insert.
Use this function, for example, to blow out
leaves or dust from the garage, workroom or
work shop.
Illustration
Connect connection hose. Open the slide of
the air regulation, and select the desired
blowing performance.
ṇ
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note:
If the container is full a float closes the
suction opening and the appliance works at a
higher speed. Switch off the appliance immedi-
ately and empty the container.
Adapt the adapter to the connection diame-
ter of the electric tool using a knife if neces-
sary.
Illustration
Electric power tools with a power consumption
of 100-2100 W can be connected.
A
) Plug the enclosed adapter onto the suc-
tion hose and connect the electric tool with
the connection.
or
B
) Use hose Flex-Tool; attach the thicker
end directly to the surction hose and the oth-
er end on the enclosed adapter and connect
it to the electric tool.
Illustration
Connect the mains plug of the electric power
tool to the vacuum cleaner.
Switch the vacuum cleaner to
Position II
and start working.
Note:
The suction turbine starts with a delay
of 0.5 seconds after the electric tool has
been switched on. After the electric tool has
been switched off, the suction turbine will
continue to run for approx. 5 seconds to
suck in the remaining dirt from the suction
hose.
Turn off the appliance and disconnect the
mains plug.
Empty the container
Illustration
Remove the motor casing and empty the
container.
Storing the Appliance
Illustration
Place the accessories in the appropriate
compartments at the appliance and store
the appliance in a dry room.
The device is to be fastened properly before
transporting the device in the car.
ƽ
Risk of injury
Always switch off the appliance and pull out the
mains plug before care and maintenance work.
ṇ
Caution
Do not use abrasives, glass or universal clean-
ers! Never immerse the appliance in water.
Clean the appliance and accessory parts
made of plastic with a commercial plastic
cleaner.
Vacuuming hard surfaces
Vacuuming carpeted floors
Blowing function
Wet vacuum cleaning
Working with electrical power tools
A 2234 pt A 2534 pt
A 2574 pt
EU 100 - 2100 W 100 - 2100 W
CH 100 - 1100 W 100 - 900 W
GB 100 - 1800 W 100 - 1600 W
Finish operation
Transporting the device
Maintenance and Care
Cleaning the appliance and accessories
English 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher A 2234 PT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher A 2234 PT in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info