Manual Karcher A 2206 X (page 9 of 116) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

71394

Zoom out

Zoom in

1/116

Deutsch 5

Î The filling level of the filter bag depends

on the dirt that is sucked in.

The filter bag needs to be replaced more

frequently while sucking in fine dust, sand,

etc.

Î Use a preliminary separator while sucking

in ash or rust particles (order no. 2.863-

139).

Illustration

Î Insert the hard surface inlay into the floor

nozzle. The bristles should point towards

the front.

Î Press both the locking flaps inwards.

Î Remove the hard-surface insert.

Use this function, for example, to blow out

leaves or dust from the garage, hobby room,

work shop, courtyard or garden.

Illustration

Î Connect connection hose. Open the slide

of the air regulation, and select the de-

sired blowing performance.

ṇ Caution:

Do not use a filter bag!

Immediately switch the appliance off if foam

forms or liquids escape!

Note: If the container is full a float closes the

suction opening and the appliance works at a

higher speed. Switch off the appliance imme-

diately and empty the container.

Further, for A 2236 X pt:

Illustration

Electric power tools with a power consump-

tion of 100-2100 W can be connected.

(CH: 100 - 1100 W, UK: 100 - 1800 W)

Î A) Plug the enclosed adapter onto the

suction hose and connect the electric tool

with the connection.

Î B) Use hose Flex-Tool; attach the thicker

end directly to the surction hose and the

other end on the enclosed adapter and

connect it to the electric tool.

Illustration

Î Connect the mains plug of the electric

power tool to the vacuum cleaner.

Î Switch the vacuum cleaner to Position II

and start working.

Note: The suction turbine starts with a de-

lay of 0.5 seconds after the electric tool

has been switched on. After the electric

tool has been switched off, the suction tur-

bine will continue to run for approx. 5 sec-

onds to suck in the remaining dirt from the

suction hose.

Î Turn off the appliance and disconnect the

mains plug.

Empty the container

Illustration

Î Press the unlocking mechanism by foot

and remove the vacuuming device from

the chassis.

Illustration

Î Remove the motor casing and empty the

container.

Î Insert the vacuuming device in the chas-

sis - the container is self-locking.

Storing the Appliance

Illustration

Î Place the accessories in the appropriate

compartments at the appliance and store

the appliance in a dry room.

Î The large wheels facilitate transportation

on stairs; hold the device at the transport

handle while doing so.

Note: Never transport the device at the

handle of the vacuuming device; risk of

tilting!

Î The device is to be fastened properly be-

fore transporting the device in the car.

Note: We recommend that you first re-

move the vacuuming device from the

chassis.

Vacuuming hard surfaces

Vacuuming carpeted floors

Blowing function

Wet vacuum cleaning

Working with electrical power tools

Finish operation

Transporting the device

English 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Karcher A 2206 X in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Karcher A 2206 X Manual

Product: