460700
9
Zoom out
Zoom in
Previous page
1/124
Next page
English 5
Important tips:
For a dust-free disposal of the vacuuming
material we recommend to insert the filter
bag as well. This provides the additional
advantage that the cartridge filter will not
become contaminated that quickly.
The filling level of the filter bag depends
on the dirt that is sucked in.
Change the filter bag regularlyso that it
does not burst!
The filter bag needs to be replaced more
frequently while sucking in fine dust, sand,
etc.
Use a preliminary separator while sucking
in ash or rust particles (order no. 2.863-
139).
Illustration
Î Insert the hard surface inlay into the floor
nozzle. The bristles should point towards
the front.
Illustration
Î Press both the locking flaps inwards.
Î Remove the hard-surface insert.
Do not use a filter bag!
Switch off the appliance immediately if
there is foam, liquid escape or if the
container is full!
Illustration
Î It is possible to suck in liquids using the at-
tachments shown in the illustration.
Note: If the container is full a float closes
the suction opening and the appliance
works at a higher speed. Switch off the ap-
pliance immediately and empty the con-
tainer.
Î Use the hard-surface insert. The bristles
should point towards the front.
Î Work without the hard surface insert.
Illustration
Î Plug the enclosed adapter onto the suc-
tion hose and connect the electric tool
with the connection.
Illustration
Î Connect the mains plug of the electric
power tool to the vacuum cleaner.
Î Switch on the appliance (position I) and
switch on the electrical tool.
Note: Suction turbine and electrical tool
start running. The suction turbine contin-
ues to run even if the electrical tool is
switched off. Switch off the appliance, if
required.
Î Switch on the appliance (position II).
Note: The appliance is now ready for au-
tomatic operations. The suction turbine
has still not started
Î Switch on the electrical tool.
Note: The suction turbine starts with a de-
lay of 0.5 seconds. After the electric tool
has been switched off, the suction turbine
will continue to run for approx. 5 seconds
and the appliance is then switched off au-
tomatically.
Î Clean the dirty attachments.
Note: Suck in approx. 5 l of fresh water
through used attachment.
Illustration
Î Turn off the appliance and disconnect the
mains plug.
Î Empty the container, rinse with fresh wa-
ter and dry.
Illustration
Î Loosen the fixing of the cartridge filter.
Remove the cartridge filter.
Vacuuming hard surfaces
Vacuuming carpeted floors
Wet vacuum cleaning
Wet suction on hard surfaces
Wet suction on carpets
Working with connected electric
tool
A 2024 pt / A 2064 pt
A 2074 pt
Finish operation
After wet suction
English 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher A 2074pt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher A 2074pt in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info