487701

Kalorik TKG HL 14 N Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
6 TKG HL 14 N - 100519
Assembly page 6/32
Fax +32 2 359 95 50
POSITIONING OF THE APPLIANCE
The heater should only be operated at a minimum distance of 50cm from any wall or other
object. Position the air flow in order to optimise the heating of the room. Avoid corners, small
volumes, floors and ceilings.
OPERATION
When the appliance is switched on for the first time, a slight smell may be emitted. Please
ensure sufficient ventilation. This smell will disappear very quickly.
1. Plug in the appliance.
2. Adjust the direction of the airflow with the frontal grid.
3. Turn the selector to the desired position.
0 OFF
Fan without heater
~ Low heat output (1000W)
≈ Full heat output (2000W)
The pilot light will illuminate to indicate that the appliance is in use.
4. If you selected low or full heat output, choose the desired temperature with the
thermostat. With the thermostat, the temperature can be regulated steplessly. When the
desired temperature is reached, the unit will automatically switch off. Once the
temperature has fallen below the pre-set level, the heater will switch on again.
5. To switch off the appliance, put the selector in position "0".
Frost protection: If the thermostat is set to its “*” position with the selector in ~ or ≈ position, the
unit will switch on once the temperature has fallen below +5°C. Make sure the heat output is
sufficient to keep the room temperature above freezing point.
OVERHEATING PROTECTION
This heater is protected with an overheating protection that switches off the appliance
automatically in case of overheating, e.g. due to the total or partial obstruction of the grids. In
this case, unplug the appliance, wait about 10 minutes for it to cool and remove the object
that is obstructing the grids. Then switch it back on as described above. The appliance should
operate normally. Should the problem persist, please contact the nearest customer service.
CLEANING AND CARE
Before cleaning the appliance, ensure it is disconnected from the power supply and has
cooled down completely.
To avoid the risk of electric shock, do not clean the heater with water and do not immerse
it in water or any other liquid.
The housing may be wiped with a slightly damp, lint-free cloth.
If necessary, dust particles accumulated in the air outlet openings may be removed with a
vacuum cleaner.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik TKG HL 14 N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik TKG HL 14 N in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info