487516
8
Zoom out
Zoom in
Previous page
1/32
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
8 TKG CV 1000 T - 100430
Assembly page 8/32
Fax +32 2 359 95 50
CONNECTION TO THE MAINS SUPPLY
Caution: We cannot be held responsible for any damage due to the wrong use or the non-
observance of this instruction manual.
The convection heater should only be connected to an earthed socket installed in
accordance with the regulations. Make sure that the supply voltage corresponds with the
voltage marked on the rating label.
This product complies with CE-directives.
MOUNTING
Before using the convection heater for the first time, the feet must be fitted to the base of the
unit and then secured with the screws provided (3 screws for each foot). When the appliance
is correctly assembled, it will be stable and ready for use. Never use the convection heater if
the feet have not been assembled.
OPERATION
After having installed your convection heater, insert the plug into an earthed power socket.
When the appliance is switched on for the first time, a slight smell may be emitted. Please
ensure sufficient ventilation. This smell will disappear very quickly.
The power knob allows you to choose the desired power level.
The thermostat regulates the temperature in the room. A red pilot light will allow you to check
the thermostatic regulation. When the appliance is heating, this pilot light will be on. It will go
out when the desired temperature is reached.
Power and turbo
I = reduced power (750W)
II = medium power (1250W)
III = full power (2000W)
The « turbo » can be used either with heating function (power knob in position I , II or III) and in
this case it allows you to enhance the air circulation and thus to heat a larger area more
rapidly.
Or it can be used without heating function (power knob in position 0) and in this case it just
makes the air circulate in order to lower the room temperature a little.
Note: the metallic parts of this appliance become hot during use so if you need to move the
appliance during use, use the side handles.
OVERHEATING PROTECTION
This heater is protected with an overheating protection that switches off the appliance
automatically in case of overheating, e.g. due to the total or partial obstruction of the grids. In
this case, unplug the appliance, wait about 10 minutes for it to cool and remove the object
that is obstructing the grids. Then switch it back on as described above. The appliance should
operate normally. Should the problem persist, please contact the nearest customer service.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik TKG CV 1000 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik TKG CV 1000 T in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info