491057
6
Zoom out
Zoom in
Previous page
1/12
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
6 KA CH 4 080529
Assembly page 6/12
Fax +32 2 359 95 50
Note: When first used, the heater may release a slight, harmless odour. This odour is a normal
occurrence caused by the initial heating of the internal heating elements and will not occur
again.
Thermostatic control dial / economiser switch:
This dial adjusts the heater temperature and automatically shuts the heater off once the
desired temperature is achieved.
When you chose middle heat or high heat (in low heat position energy saving does not
operate), this sensible heat output controller will automatically open or close the heating
element in order to keep selected heat.
First turn the thermostat/economiser switch clockwise to the highest setting.
When the room temperature reaches the requested level, turn the switch anticlockwise to
lower the heat and switch off the heating elements.
Note: In medium and high position the lower heating element will stay on to keep the
necessary room temperature.
Flame adjusting dial:
You can enjoy the fire effect even if the heater has been switched off, as long as the
power switch is not in 0 position.
The fire adjusting dial enables you to set the fire and light intensity.
When in the minimum position, the fire effect and the light have a weak intensity.
To get a higher heat, turn the switch clockwise.
CLEANING AND MAINTENANCE
Warning: The unit must be unplugged from the power supply prior to any maintenance or
cleaning in order to reduce the risk electric shock or fire.
A. Light bulb replacement procedure
Like all light bulbs, bulbs require periodic replacement. When the bulbs in your unit have
burned out you will notice one or more of the following:
The flame is dim or dark in certain areas
The log set ember bed appears dim or dark in certain areas
Your unit must be opened in order to replace the light bulbs. To reduce the number of times
you need to open the unit, replace all the lights bulbs at the same time if they are close to the
end of their rated life.
Warnings:
The light bulbs in your unit can become extremely hot. Allow at least 10 minutes between
turning off the unit and removing the light bulbs to avoid the accidental burning of the
skin.
Always make sure to replace the bulbs by a bulb with exactly the same features.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik KA CH 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik KA CH 4 in the language / languages: English, Portuguese as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info