491026
8
Zoom out
Zoom in
Previous page
1/20
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
8 KA BL 1 - 050825
Assembly page 8/20
Fax +32 2 359 95 50
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to
follow this instruction carefully may result in damage to the motor. Please refer to the rating
label for the maximum continuous usage time (KB xx min where xx is the maximum usage time).
The breaks should last at least 10 minutes.
CAUTION!
Your appliance is fitted with a security device on the lid. If the lid is not fitted correctly, the
appliance won't start.
MOUNTING OF THE BLENDER AND USE (SEE PAGE 4)
Assemble the pouring jug on the motor base and turn it anticlockwise until it stops. Both
arrows are to be facing each other (see pictures 1, 2 and 3).
Remove the lid by sliding the locking feature backwards and lifting the lid (picture 4).
Place ingredients in the pouring jug and close the lid (picture 5).
Plug in the appliance.
Choose the mixing speed with the button on the motor base. The position 0 corresponds
to the stopping of the appliance, the position 1 to the slow speed and the position 2 to the
fast one.
The position pulse position (P) is particular because the button has to be kept manually.
This position is generally used to crush ice in order to avoid damages on the blades, but it
can also be used to complete the mixing. This function is particularly suitable for crushing
ice.
It is also possible to add liquids or other ingredients anytime without stopping the
appliance (picture 6). You only have to remove the cap, which closes the feeding
opening by turning and raising it straight up .
Once you have finished the preparation, stop the appliance (position 0) and unplug the
appliance.
To serve, remove the jug from the motor block, remove the lid and pour.
HOW TO CLEAN
Always unplug from outlet before cleaning.
For a quick rinsing of the pouring jug (for example between two preparations), you can
use clear water and switch on your appliance for a few seconds. In this case, do not use
any detergent.
For a full cleaning of the pouring jug, remove it from the motor base. Then you can clean
the all with soapy water and rinse thoroughly with clear water. Dry before assembling.
You can wipe the motor base with a soft damp cloth.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik KA BL 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik KA BL 1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info