488290

Kalorik KA AC 8 Manual

13
Zoom out
Zoom in
Previous page
1/17
Next page
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511,
please register!
13
Automatic operation
When the air conditioner is ready for use, switch on the power and the OPERATION
indicator lamp on the display panel of the indoor unit starts flashing.
1. Use the MODE select button to select AUTO.
2. Push the TEMP button to set the desired room temperature.
The most comfortable temperature settings are between 21。C/70OF to 28oC/82OF
3. Push the ON/OFF button to start the air conditioner. The OPERATION indicator on the
display panel of the indoor unit lights. The operating mode of AUTO FAN SPEED is
automatically set and there are no indicators shown on the display panel of the
remote control.
4. Push the ON/OFF button again to stop the unit operation.
NOTE
1. In the AUTO mode, the air conditioner can logically choose the mode of COOL, FAN,
HEAT and DRY by sensing the difference between the actual ambient room
temperature and the set temperature on the remote control.
2. If the AUTO mode is not comfortable for you, the desired mode can be selected
manually.
COOL, HEAT, and FAN ONLY Operation
1. If the AUTO mode is not comfortable, you may manually override the settings by
using COOL, DRY, HEAT (HEAT PUMP units only), or FAN ONLY modes.
2. Push the TEMP button to set the desired room temperature. When in COOLING mode,
the most comfortable settings are 21。C/70OFor above. When in HEATING mode, the
most comfortable settings are 28oC/82OFor below.
3. Push the FAN SPEED to select the FAN mode of AUTO, HIGH, MED or LOW.
4. Push the ON/OFF button. The operation indicator lights and the air conditioner starts
to operate per your settings. Push the ON/OFF button again to stop this unit
operation
NOTE: The FAN ONLY mode cannot be used to control the temperature. While in this
mode, only steps 1、3 and 4 may be performed.
DRY OPERATION
1. Push the MODE button to select DRY.
2. Push the TEMP button to set the desired temperature from 21。C/70OF to 28oC/82OF.
3. Push the ON/OFF button. The operation lamp lights and the air conditioner starts to
operate in the DRY mode. Push the ON/OFF button again to stop this unit operation.
TIMER Operation
TIMER ON button can set the auto-on time of the unit. TIMER OFF button can set the
auto-off time of the unit.
A. To set the starting time.
1. Push the TIMER ON button, then the remote control shows TIMER ON, the last set time
for the starting operation and the signal "h" will be shown on the DIGITAL DISPLAY
area. You are now ready to reset the time to START the operation.
2. Push the TIMER ON button again to set desired unit start time.
3. After setting the TIMER ON, there will be a one-half second delay before the remote
control transmits the signal to the air conditioner. Then, after approximately another 2
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik KA AC 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik KA AC 8 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info