Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511,
please register!
10
1. BEFORE USE
Dehumidifying and Cooling Operations
- The operating range for dehumidifying is 10 °C-30 C, and the operating range for
cooling operating is 17°C-30 °C.
- If the cooling or dehumidifying operations have been switched off and need
switching on again in a short time, allow approximately three minutes for the
cooling or dehumidifying operations to resume.
- Make sure the water pump drain tube is correctly connected to the unit.
Power supply:
- Insert the AC Power Plug to a AC socket.
- Do not connect the air conditioner to a multiple socket outlet which is also being
used for other electrical appliance.
- Be sure the power supply is AC 230V~ 50Hz.
2. COOLING OPERATION
- Press the "MODE" button several times until the "COOL" indicator light comes on.
- Press the "TEMP SETTING" buttons " ▲" or " ▼" to select your desired room
temperature.(17 C-30 C)
- Press the "FAN SPEED" button to choose the fan speed.
3. DEHUMIDIFYING OPERATION
- Press the "MODE" button several times until the "DRY" indicator light comes on.
- Press the "TEMP SETTING" buttons "▲ " or "▼ " to select your desired room
temperature. (10 C-30 C)
- The fan will run at a fixed speed at this setting.
- Keep windows and doors closed for the best dehumidifying effect.
- Do not put the duct to window.
4. HEATING OPERATION (Cooling only type without heat feature)
- Press the "MODE" button several times until the "HEAT" indicator light comes on.
- Press the "TEMP SETTING" buttons "▲ " or "▼ " to select your desired room
temperature. (17 C-30 C)
- Press the "FAN SPEED" button to choose the fan speed.
- Do not put the duct to window.
5. FAN OPERATION
- Press the "MODE" button several times until the "FAN " indicator light comes on.
- Press the "FAN SPEED" button to choose the fan speed.
- Do not put the duct to window.
6. TIMER OPERATION
Setting the on timer:
- Press the "TIMER ON" button when the air conditioner is off. Select the time you
need the unit start to operate.
- The Operation Paned Window will display "ON"
- The starting time is adjustable from 0.00 to 24.
Setting the off timer:
- Press the "TIMER OFF" button when the air conditioner is on. Select the time you
need the unit turn off. The Operation Panel Window will display "OFF".
- The turning off time is adjustable from 0.00 to 24.