612225

Kalorik EKS 1001 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
6
TKG EKS 1001 - 120124
Assembly page 6/32
Fax +32 2 359 95 50
USE
Put the scales on an even and hard surface, for instance a table. Avoid soft surfaces.
Normal weighing
1) Press the “ON/OFF” key lightly with your finger. The scales will turn on and the LCD
display will show “HELO” for a few seconds and then “0” g, “0.000” lb, “0.00” oz or
“0.000” kg.
2) Put the object you want to weigh on the kitchen scale. The stabilized weight is
displayed.
3) Remove the object from the kitchen scale.
4) The scale turns off automatically after about 45 seconds. You can also switch the
scale off anytime by keeping the “ON/OFF/TARE” key pressed for two seconds.
Tare function
With the tare function you can measure only the content of a container without measuring the
weight of the container itself.
1) Press the “ON/OFF” key lightly with your finger. The scales will turn on and the LCD
display will show “HELO” for a few seconds and then “0” g, “0.000” lb, “0.00” oz or
“0.000” kg.
2) Put the empty container (for instance a bowl) on the weighing platform. The
stabilized weight is displayed.
3) Press the “TARE” key to reset the weight to "0". The weight of the container will now be
displayed as zero, even though it remains on the weighing platform.
4) Add the ingredients into the container and read the weight when the display is
stable. Only the weight of the ingredients in the container will be displayed.
5) If you have to weigh/add several ingredients one after another in the same
container, you can also use the tare function and in this way you will each time get
the exact weight of the ingredient you have added.
6) The scale turns off automatically if there is no action within 45 seconds. You can also
switch the scale off anytime by keeping the “ON/OFF/TARE” key pressed for two
seconds.
Overload indicator
If the symbol appears on the LCD screen, it means that the maximum weight
accepted by your scales is exceeded, please remove the object from the weighing platform in
order not to damage your scales.
Low battery indicator
If the symbol is displayed on the LCD screen, it means that the battery of your scales
should be replaced (see paragraph Before the first use).
Battery
If your appliance does not work properly, it is probably because the battery is discharged. In
that case, replace it with a new one of the same type (see paragraph Before the first use).
Please dispose of the old batteries in an environmentally friendly way.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik EKS 1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik EKS 1001 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info