134089
6
Zoom out
Zoom in
Previous page
1/13
Next page
Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register!
4
OPERATION
Auto, cooling, heating, dehumidifying and ventilation mode
Under auto operation, the microcomputer will produce the ideal environment according to the
actual room temperature (auto settled temperature is 25°C).
Under cooling operation, if the set temperature is higher than the room temperature, the air
conditioner will stop cooling.
Under heating operation, if the set temperature is lower than the room temperature, the air
conditioner will stop heating.
Under dehumidification mode, by the temperature of the room it runs discontinuously with lower fan
speed.
Operation:
1. Press the "ON/OFF" button to switch on the air conditioner.
2. Press the "mode" button to choose the desired operation mode.
3. Press the "temp set" button to set the temperature (under auto operation, the temperature will
increase or decrease relative to the auto settled temperature).
4. Press the "swing" button to choose the airflow direction.
5. Press the "fan speed" button to set the fan speed.
Sleep
Under cooling operation, the temperature will increase by 1,5°C. Then the air conditioner will work on
the set temperature.
Under heating operation, the temperature will drop 1°C after the sleep function has run for 2 hours, then
the temperature will drop another 0,5°C. Then the air conditioner will work at the set temperature.
Operation:
1. Press the "ON/OFF" button to switch on the appliance.
2. Press the "mode" button to choose "cooling" or "heating".
3. Press the "temp set" button to set the temperature.
4. Press the "swing" button to choose the airflow direction.
5. Press the "fan speed" button to set the fan speed.
6. Press the "sleep" button to turn on the sleep function. Press it again to turn off the sleep function.
NOTES: remote control LCD display no variety
Time
1. Just insert the batteries or press down the "TIME" button several seconds, then " " is blinking on
the LCD.
2. Press the "TIME" button to adjust time. Each time you press the "TIME" button, time will increase
by 1 minute or 1 hour.
3. Press down the "TIMER" button for several seconds, " " will stop blinking, time setting is ok.
Timer
Press the "TIMER" button, the display on LCD will be cyclically as follows: "ON TIMER" "OFF
TIMER" "NO TIMER" "ON TIMER".
1. ON TIMER
Press the "TIMER" button, "ON TIMER" is blinking.
Press the "TIME" button to adjust the "ON TIME".
Each time you press the "TIME" button, time increases by 10 minutes; press the "TIME" button down for
several seconds, time increases by 10 minutes or 1 hour.
Release the "TIME" button, "ON TIMER" will stop blinking after 4 seconds. The "ON TIMER" setting is
ok.
2. OFF TIMER
Press the "TIMER" button, "OFF TIMER" is blinking.
Next step is the same as "ON TIMER" setting.
3. CANCEL TIMER
Press the "TIMER" button till "ON TIMER" or "OFF TIMER" disappears, then cancel the timer.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik ac 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik ac 9 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalorik ac 9

Kalorik ac 9 User Manual - German - 13 pages

Kalorik ac 9 User Manual - Dutch - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info