487426

Kalorik 11 Manual

7
Zoom out
Zoom in
Previous page
1/32
Next page
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International BELGIUM.
The pages must be reproduced and folded in order to obtain a mini
booklet A5 (+/- 148.5 mm width x 210 mm height). When folding,
make sure you keep the good numbering when you turn the pages
of the I/B. Don’t change the page numbering. Keep the language
integrity.
7
EXC OFR 1 - 110310
Assembly page 7/32
Fax +32 2 359 95 50
This radiator is filled with a precise quantity of special oil. Any repairs requiring the opening
of the oil container are to be made by the manufacturer or its authorized service agent.
They also should be contacted if oil is leaking.
When scrapping the appliance, all regulations concerning the disposal of oil should be
followed.
(*)
Competent qualified electrician: after-sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this electrician.
CONNECTION TO THE MAINS SUPPLY
The radiator should only be connected to an earthed socket installed in accordance with the
regulations.
Make sure that the supply voltage corresponds with the voltage marked on the rating label
(230V (AC)) and the rated electric current is not lower than 10A.
This product complies with all binding CE-labelling directives.
ASSEMBLY
Before using the radiator for the first time, the wheels must be fitted to the unit and then
secured with the wing nuts provided.
• Turn the heater upside down.
• Position the two wheels base between the end fins.
• Attach them to the heater using the U-hook and wing nuts.
• Fasten the wing nuts.
• Turn the heater the right way around.
THE HEATER MUST NOT BE USED WITHOUT ITS WHEELS.
When the appliance is switched on for the first time, a slight smell may be emitted. Please
ensure sufficient ventilation.
OPERATION
1. Select the power with the power selector. It has 3 different positions:
I = reduced power
II = medium power
I+II = full power
2. Turn the thermostat clockwise to increase the temperature and anticlockwise to reduce it.
The pilot light will turn on indicating that the appliance is heating. During use, the pilot light
will come on and off. It will turn off as soon as the set temperature is reached.
3. If you want to switch off your appliance, turn off the two switches (thermostat knob to
“LOW” position and power selector to “0”), remove the plug from the power supply and
place it in its storage location. CAUTION: YOUR APPLIANCE WILL REMAIN HOT FOR A FEW
MINUTES.
4. To move your appliance, take it by its handle, raise it and roll it.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalorik 11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalorik 11 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info