725640
3
Zoom out
Zoom in
Previous page
1/56
Next page
UM-79E0A-002-00
User's manual
Original instructions
E7000 Series
Shimano Total Electric Power System
1
CONTENTS
IMPORTANT NOTICE
......................................................................................3
Important safety information
.........................................................................3
To ensure safety
...........................................................................................3
Features of SHIMANO STEPS E7000 Series
........................................................7
Assist mode
........................................................................................................................8
Start your STEPS
...........................................................................................9
Names of parts
...........................................................................................12
Specifications
.............................................................................................13
Charging the battery
...................................................................................14
About the charger LED lamp
................................................................................................17
About the battery LED lamps
...............................................................................................17
Handling and charging the battery
....................................................................................... 18
Installing / removing the battery
..........................................................................................19
Operation
.................................................................................................23
Turning the power ON / OFF
................................................................................................23
Basic operation
..................................................................................................................25
Cycle computer basic screen
................................................................................................27
Changing assist mode
.........................................................................................................29
Switching to [WALK] mode (walk assist mode)
....................................................................... 30
Current gear and traveling data display (SC-E7000)
.................................................................31
Switching between displayed traveling data
..........................................................................31
About the setting menus
.............................................................................33
Accessing the setting menu
.................................................................................................33
Clear
................................................................................................................................34
Clock
...............................................................................................................................35
Light
................................................................................................................................36
Beep
................................................................................................................................ 37
Unit
................................................................................................................................. 38
Language
.........................................................................................................................39
Font color
......................................................................................................................... 40
Adjust
.............................................................................................................................. 40
RD protection reset
............................................................................................................41
English
2
Exit
..................................................................................................................................41
Settings (EW-EN100)
...................................................................................42
RD protection reset
............................................................................................................42
Adjust
.............................................................................................................................. 42
Connection and communication with devices
..................................................43
About wireless functions
..................................................................................................... 44
Troubleshooting
.........................................................................................45
Battery LED lamp error indications
.......................................................................................45
Error messages on the cycle computer
...................................................................................46
Troubleshooting
................................................................................................................49
3
User's manuals in other languages are
available at :
http://si.shimano.com
IMPORTANT NOTICE
Contact the place of purchase or a bicycle dealer for
information on installation and adjustment of the products
which are not found in the user's manual. A dealer's
manual for professional and experienced bicycle mechanics
is available on our website (http://si.shimano.com).
Do not disassemble or alter this product.
Use the product according to local laws and regulations.
The Bluetooth
®
word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use
of such marks by SHIMANO INC. is under license. Other
trademarks and trade names are those of their respective
owners.
For safety, be sure to read this user's
manual thoroughly before use, and
follow it for correct use.
Important safety information
For replacement information, contact the place of purchase
or a bicycle dealer.
Be sure to observe the following in order to avoid burns or
other injury from fluid leakages, overheating, fire or
explosions.
To ensure safety
DANGER
Handling the battery
Do not deform, modify, disassemble or apply solder directly
to the battery. Doing so may cause leakage, overheating,
bursting, or ignition of the battery.
Do not leave the battery near sources of heat such as
heaters. Do not heat the battery or throw it into a fi re.
Doing so may cause bursting or ignition of the battery.
Do not subject the battery to strong shocks or throw it. If this is
not observed, overheating, bursting, or fi re may occur.
Do not place the battery into fresh water or sea water, and do
not allow the battery terminals to get wet. Doing so may
cause overheating, bursting, or ignition of the battery.
Use the Shimano specifi ed charger and observe the speci ed
charging conditions when charging the specifi ed battery. Not
doing so may cause overheating, bursting, or ignition of the
battery.
WARNING
To ensure safe riding
Do not give too much of your attention to the cycle computer
display while riding, otherwise accidents may result.
Check that the wheels are securely installed to the bicycle
before commencing riding. If the wheels are not securely
installed, the bicycle may fall over and serious injury may result.
If riding a power-assisted bicycle, make sure that you are
fully familiar with the starting-off characteristics of the
bicycle before riding it on roads with several vehicle lanes
and pedestrian footpaths. If the bicycle starts off
suddenly, accidents may result.
Check that the bicycle lights illuminate before riding at night.
Using the product safely
Be sure to remove the battery and charging cable before
wiring or attaching parts to the bicycle. Otherwise, an
electric shock may result.
When charging the battery while it is installed on the
bicycle, do not move the bicycle. The power plug for the
battery charger may come loose and not be fully inserted
into the electrical outlet, resulting in risk of fi re.
Do not inadvertently touch the drive unit when it has been
continuously used for a long period of time. The surface of
the drive unit becomes hot and could cause burns.
When installing this product, be sure to follow the
instructions given in the user's manual. Furthermore, it is
recommended that you use only genuine Shimano parts at
these times. If bolts and nuts are left loosened or the
product is damaged, the bicycle may suddenly fall over and
serious injury may result.
Do not disassemble the product. Disassembling it may cause
injury to persons.
After reading the user's manual carefully, keep it in a safe
place for later reference.
4
Handling the battery
If any liquid leaking from the battery gets into your eyes,
immediately wash the affected area thoroughly with
clean water such as tap water without rubbing your eyes,
and seek medical advice immediately. If this is not done,
the battery liquid may damage your eyes.
Do not recharge the battery in places with high humidity
or outdoors. Doing so may result in electric shock.
Do not insert or remove the plug while it is wet. If this is not
observed, electric shocks may result. If there is water leaking
out of the plug, dry it thoroughly before inserting it.
If the battery does not become fully charged even after the
designated charging time, immediately unplug the battery
from the outlet and contact the place of purchase. Doing so
may cause overheating, bursting, or ignition of the battery.
Do not use the battery if it has any noticeable scratches
or other external damage. Doing so may cause bursting,
overheating or problems with operation.
The operating temperature ranges for the battery are
given below. Do not use the battery in temperatures
outside these ranges. If the battery is used or stored in
temperatures outside these ranges, fire, injury or
problems with operation may occur.
1. During discharge: -10°C - 50°C
2. During charging: 0°C - 40°C
Cleaning
The frequency of maintenance will vary depending on the riding
conditions. Periodically clean the chain using an appropriate chain
cleaner. Do not use alkaline or acidic cleaning agents for removing
rust under any circumstances. If such cleaning agents are used,
they may damage the chain and serious injury may result.
CAUTION
To ensure safe riding
Observe the instructions in the user's manual for the
bicycle, in order to ride safely.
Using the product safely
Periodically check the battery charger and adapter, particularly
the cord, plug, and case, for any damage. If the charger or
adapter is broken, do not use it until it has been repaired.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Do not allow children to play near the product.
Handling the battery
Do not leave the battery in a place exposed to direct
sunlight, inside a vehicle on a hot day, or other hot
places. This may result in battery leakage.
If any leaked fluid gets on your skin or clothes, wash it
off immediately with clean water. The leaked fluid may
damage your skin.
Store the battery in a safe place out of the reach of
infants and pets.
Cleaning
If any malfunctions or other problems occur, contact the
place of purchase.
Never attempt to modify the system yourself, as it may
cause problems with system operation.
NOTE
Using the product safely
Be sure to install caps to any connectors which are not
being used.
For installation and adjustment of the product, consult a
dealer.
The Product is designed to be fully waterproof to
withstand wet weather riding conditions. However, do
not deliberately place them into water.
Do not clean the bicycle in a high-pressure wash. If water
gets into any of the components, operating problems or
rusting may result.
Do not turn the bicycle upside down. The cycle computer
or the shifting switch may get damaged.
Handle the product carefully, and avoid subjecting it to
any strong shocks.
Although the bicycle still functions as a normal bicycle even
when the battery is removed, the light does not turn on if
it is connected to the electric power system. Be aware that
using the bicycle under these conditions will be considered
non-observance of the road traffic laws in Germany.
When charging the battery while it is mounted on the
bicycle, be careful of the following:
-
When charging, make sure there is no water on the
charging port or the charger plug.
-
Ensure that the battery is locked into the battery
mount before charging.
-
Do not remove the battery from the battery mount
while charging.
-
Do not ride with the charger mounted.
-
Close the charging port cap when not charging.
5
Handling the battery
When you carry a power-assisted bicycle in a car, remove
the battery from the bicycle and place the bicycle on a
stable surface in the car.
Before connecting the battery, make sure that there is no
buildup of water or dirt in the connector where the
battery will be connected.
The use of a genuine Shimano battery is recommended. If
using a battery from another manufacturer, make sure to
carefully read the instruction manual for the battery
before use.
Disposal information for countries outside
the European Union
This symbol is only valid within the
European Union. Follow local regulations
when disposing of used batteries. If you
are not sure, consult the place of purchase
or a bicycle dealer.
Connection and communication with PC
A PC linkage device can be used to connect a PC to the
bicycle (system or components), and E-TUBE PROJECT can be
used to carry out tasks such as customizing single
components or the whole system and updating firmware.
PC linkage device: SM-PCE1/SM-PCE02
E-TUBE PROJECT: PC application
Firmware: software inside each component
Connection and communication with
smartphone or tablet
It is possible to customize single components or the system,
and update firmware, using E-TUBE PROJECT for
smartphones/tablets after connecting the bicycle (system or
components) to a smartphone or tablet via Bluetooth
®
LE.
E-TUBE PROJECT: app for smartphones/tablets
Firmware: software inside each component
Cleaning
The number found on the battery mount key is necessary
when purchasing spare keys. Keep it in a safe place.
There is a space to enter the key number on the back
cover of this user's manual. Enter the key number for
safekeeping and later reference.
Contact the place of purchase for updates of the product
software. The most up-to-date information is available
on the Shimano website. For details, refer to the
"Connection and communication with devices." section.
Do not use thinner or other solvents to clean any of the
products. As such substances may damage the surfaces.
You should periodically wash the chainrings in a neutral
detergent. In addition, cleaning the chain with neutral
detergent and lubricating it can be an effective way of
extending the useful life of the chainrings and the chain.
Use a damp cloth, with the water well wrung out, when
cleaning the battery and plastic cover.
For any questions regarding handling and maintenance,
contact the place of purchase.
Products are not guaranteed against natural wear and
deterioration from normal use and aging.
For maximum performance we highly recommend
Shimano lubricants and maintenance products.
Assist
If the settings are not correct, for instance if the chain
tension is too tight, the proper assist force may not be
obtained. If this happens, contact the place of purchase.
6
Label
Some of the important information contained in this
user's manual is also indicated on the battery charger
label.
FCC compliance information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and
receiver.
-
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-
Consult the dealer or an experienced radio/TV
technician for help.
7
Features of SHIMANO STEPS E7000 Series
Hi-End MTB assistance components.
Powerful propulsion and silent drive unit.
Smooth and natural power assistance and riding experience.
Support optimal suspension design afforded by compact drive unit construction. Shorter chain stay frame gives rider easier
handling.
Assist power stopped simultaneously with the stop of the rider's pedaling. Quickly re-start assistance upon pedaling again.
Power assist system cooperates and harmonizes with human output.
Superior control performance facilitates comfortable riding on mountain trails.
Efficient pedaling even when power assist cuts off.
Easy to operate assist switch system designed in accordance with ergonomic principles.
Cycle computer that is compact without loss in visual clarity provides detailed traveling data by color recognition.
Q-Factor comparable to mountain bikes reduces burden on the legs from the MTB rider's experiences.
Optional chain device supports for rough riding conditions available.
Large-capacity battery allows you to enjoy long rides.
Intelligent walk assist with SEIS RD provides powerful assistance when walking the bicycle across uneven terrain such as
rocky areas.
*
The Walk assist mode function may not be able to be used in certain regions.
Q factor
8
Assist mode
You can select an assist mode for each particular application.
[BOOST] [TRAIL] [ECO]
Steep slopes and precipitous mountain
roads
Gentle ascending slopes and level
ground
Long distance riding on level
ground
Level parks with signals
When the battery level is running low, the level of assistance is lowered to increase the traveling range.
[OFF]
When you don't need power assistance.
When you are concerned about remaining battery power.
[WALK]
This function is effective when walking the E-BIKE, taking it up a sloping road, or walking it across uneven terrain such as
rocky areas.
The intelligent walk assist function activates when an electronic gear shifting system is connected.
Intelligent walk assist: Generates high torque.
Quick walk assist: Starts immediately after pressing the switch.
*
The Walk assist mode may not be able to be used in certain regions.
9
Start your STEPS
1.
Charge the battery.
It is possible to charge the battety even while it is mounted on the bicycle.
For detals, see “Charging the battery while installed on the bicycle.”
<Down-tube mount type battery>
3
2
1
Light On
Example : BT-E8010
<Integrated battery>
3
2
1
Light On
BT-E8020
Lights up
Charging
Flashing
Charging error
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Shimano Steps E7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Shimano Steps E7000 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Shimano Steps E7000

Kalkhoff Shimano Steps E7000 Additional guide - English - 51 pages

Kalkhoff Shimano Steps E7000 Additional guide - German - 51 pages

Kalkhoff Shimano Steps E7000 User Manual - German - 56 pages

Kalkhoff Shimano Steps E7000 Additional guide - Dutch - 52 pages

Kalkhoff Shimano Steps E7000 User Manual - Dutch - 56 pages

Kalkhoff Shimano Steps E7000 Additional guide - French - 51 pages

Kalkhoff Shimano Steps E7000 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info