Manual Kalkhoff Rohloff SpeedHub 500-14 (page 37 of 114) (English, German, Dutch, French, Italian)

780095

Zoom out

Zoom in

1/114

1A T T E N T I O N

7.3.2 Cable routing via the top tube

The cutting of the shifter cables, nylon liner and the cable housing as with the mounting of the cable pulley are to be

carried out the same as in chapter 7.2.1.

Ifall14gearsarenotreachable

afterconnectingthecableboxto

theexternaltransferbox,thenthe

gearboxorthetwistshifterwere

notingearposition14while

connecting. Tocorrectthis,see

page16,paragraph3.2.

"Maintenanceandcare".

Twistshifter

Shiftercable1

Shiftercable14

Cable

adjuster14

Cable

adjuster 1

Cablebox

Bypullinghubcable1,thegearboxshifts

gearsindirectionofgear#1(smaller

gears).Bypullinghubcable14,the

gearboxshiftsgearsindirectionofgear

#14(largergears).

Hubcable1liesinthefrontpositionat

thecableboxandonthetwistshifter.Hub

cable14liesintherearpositionatthe

cableboxandonthetwistshifter.

7.4Adjusting the gear display

The gear display is to be found on the body of the twist shifter. The twist shifter rubber itself has the numbers 1 - 14.

The gear display can be correctly aligned with the help of the cable adjusters on the cable guide (internal gear mech)

or on the cable box (external gear mech).

Checkthatall14gearsare

available(14gears=13clicksof

thetwistshifter)byrotatingthe

twistshifterforwardstotheend

stop(gear#14)andbackwardsto

theendstop(gear#1).

Afterthecabletensionhasbeen

correctlyadjusted,thegeardisplay

canbeadjustedbywindingone

cableadjusterinandtheother

outwardsbyequalamounts.

Mounting

8. First oilfill

Filling with oil

When the is delivered fitted in a complete bike, then it is already filled with oil. When

not, it will need to be filled with 25ml before usage.A25mm bottle of

is included in the package.

Rohloff SPEEDHUB 500/14

Rohloff SPEEDHUB OIL Rohloff SPEEDHUB

OIL

Turnthehubsothatthedrain

screwcanbeseenonthetop.

Removedrainscrew(3mmallen

key).

Screwtheoilfillingtubeintothe

oildrainholeandinsertthenozzle

oftheoilbottleintothefillingtube.

Continuallysqueezetheoilbottle

untilthecontentshasbeen

completelyfilledintothegearbox.

Squeezethe

intothegearbox.

RohloffSPEEDHUB

OIL Toequalize

theair pressurewithinthehub,

approx.25mlofair shouldbe

drawnbackintothesyringe.

Thiswillpreventtheoilfrom

leakingoutofthehub,when

removingthefillingtube.

Replacetheoildrainscrewand

tightenthisupsecurely(3mmallen

key,tighteningtorque:

0,5Nm/4in.lbs.).

P O I N T E R

Tofillthehubviasyringe,fasten

theoilfillingtubetothesyringe

andsecureitwithadropofsuper-

gluebeforeuse.Drawthe

intothesyringe,

thenscrewthetubeintothedrain

hole.

SPEEDHUBOIL

Foraquickandcleanfillingofthe

oilorwhenchangingtheoil,we

recommendtheuseofthe

OilChangeKit(Art.#8410).

Rohloff

Mounting

The oil drain screw must not be

inserted any further than flush

with the hub shell.Any deeper

could result in periodic drive loss

in certain gears.

A T T E N T I O N

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Rohloff SpeedHub 500-14 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 40.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kalkhoff Rohloff SpeedHub 500-14 Manual

Product: