780097
24
Zoom out
Zoom in
Previous page
1/36
Next page
INSTALLATION WORK
24
REPLACING CHAIN RING
If you need to replace the chain ring of your Pinion bicycle transmission
(because of wear, different gear ratio, replacement by chain ring spider), you
can order it and the required tool directly from us.
See www.pinion.eu for a selection of different chain rings.
Another method of changing the gear ratio is to replace the sprocket on your
rear wheel.
Chain ring, sprocket and chain always wear on opposite sides during use.
This means that the drive might stop working without problems (chain disen-
gages, more noise) if only one of these parts is replaced.
We recommend always replacing all these parts if one needs replacing.
)Remove chain.
)Unscrew centre screw
(1).
)Slacken both clamp screws
(2) on the crank.
)Pull the crank from the input shaft.
)Hold chain ring with chain whip or at the left crank.
)Unscrew lock ring
(3) clockwise (left-hand thread!) with the Pinion lock ring
tool
(4).
)Remove chain ring.
)Make sure that the gears
(5) and contact surfaces on the transmission side
and the chain ring
(6) or chain ring spider
(7), disc
(8) and lock ring
(3) are
clean and free from old grease.
)Lightly grease gears
(5).
)Put on the chain ring or chain ring spider (with chain ring fitted).
)Lightly grease the contact areas of the disc
(8).
)Insert the disc in the chain ring or chain ring spider.
6 N·m (53 lbf·in) max.
4 mm
10 N·m (89 lbf·in) max.
10 mm
29
1
2
30 N·m (266 lbf·in) max.
3 mm
½"
30
3
4
2
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Pinion P-Line at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Pinion P-Line in the language / languages: English as an attachment in your email.

The manual is 14.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Pinion P-Line

Kalkhoff Pinion P-Line User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info