780096
19
Zoom out
Zoom in
Previous page
1/36
Next page
INSTALLATION WORK
19
)Switch rotary shifter to position 01 (fig. 19).
19
0,4 N·m (4 lbf·in) max.
1,5 mm
20
)Guide the left end of the pulling cable (output 1.) into the internal – towards
the centre of the handlebar – adjusting screw
(10) , rotary shifter housing and
clamp
(11).
)Keep the left end of the pulling cable under tension (fig. 20).
)Make sure that the ends of the derailleur cable outer sleeve are firmly in the
stops on the adjusting screw and transmission housing.
)Tighten the two clamp screws alternately with a tightening torque of 0.4 N·m
(4 lbf·in).
)Cut the left end of the pulling cable as close as possible to the clamp with a
sharp wire cutter.
Pry the clamp out of its seat somewhat. Then, it will be easier to cut off the
end of the pulling cable.
Following that, make sure that the clamp is once again located in its seat up
to the stop.
11
10
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Pinion C-Line at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Pinion C-Line in the language / languages: English as an attachment in your email.

The manual is 14.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Pinion C-Line

Kalkhoff Pinion C-Line User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info