624049
55
Zoom out
Zoom in
Previous page
1/69
Next page
20 Original User Manual | Pedelec Impulse 2.0 Ergo
Battery in the docking station
SEAT TUBE BATTERY
If a charging fault occurs, the LED (where present)
in the charger ashes red. In this case, the charging
current is too high. Disconnect the battery om the
charger and then connect it again. If the error mes-
sage still appears, the battery and charger must be
checked by a specialist cycle shop.
7 Control unit and display
The Pedelec Impulse 2.0 Ergo can be controlled via two
elements: the control unit on the handlebar grip and the
display in the middle of the handlebar.
7.1 Control unit
1 button
2 button
3 button
4 button
1
2
3
4
Press the button to switch the system on and o. But-
tons 2 to 4 have dierent nctions depending on the
menu item you have selected.
7.1.1 Switching on/o
Press the
button on the control unit to switch the Im-
pulse system on. Aer a few seconds, the welcome screen
appears, followed by the start menu. From there you can
carry out rther settings Chapter 1.1 “General”.
Aer switching on, the system is always in the same
display mode as when you last switched it o.
To switch your Pedelec o, press the button on the con-
trol unit in the start menu.
7.1.2 Pushing assistance
The pushing assistance moves the Pedelec slowly (at a
maximum speed of 6 km/h) without you having to turn the
pedals, e.g. if you are manoeuvring in a tight space or are
pushing your Pedelec out of a basement garage.
To activate the pushing assistance, press the
button for
three seconds.
The pushing assistance is not suitable for use as
starting assistance.
7.1.3 / buttons
You can speci the power-assist level via the
/ buttons.
Each time you press one of these two buttons, the
power assist changes by one level. If you press the
button once, the level of assistance increases by
one level. If you press the button once, the as-
sistance becomes weaker by one level.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Pedelec Impulse 2.0 Ergo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Pedelec Impulse 2.0 Ergo in the language / languages: English, German as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Pedelec Impulse 2.0 Ergo

Kalkhoff Pedelec Impulse 2.0 Ergo User Manual - English, German, Dutch, French, Italian, Spanish - 289 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info