624049
44
Zoom out
Zoom in
Previous page
1/69
Next page
Original User Manual | Pedelec Impulse 2.0 Ergo 9
Opening the quick-release lever
OPEN
Closing the quick-release lever
CLOSE
As a rule of thumb, you can be condent that the
saddle clamp is suciently secure if the quick-
release lever can only be closed using the heel
of the hand and a certain level of force. You will
feel increasing resistance om the lever, begin-
ning when it is at approx. 90°. If the seatpost is
not clamped rmly or securely enough, tighten
the clamping nut or turn the screw clockwise by
another half a turn respectively while the quick-
release lever is open. Close the quick-release
lever and check that the saddle is securely fas-
tened once more.
Check that all quick-release levers are fastened
correctly and securely before every journey and
every time you return to your bike having le it
unattended.
With regard to the saddle height, there is a sim-
ple test procedure: Whilst sitting on the saddle,
the heel of your lly-stretched leg should reach
the lowest pedal position. By contrast, the balls
of your feet should reach the centre of the pedal
in the lowest pedal position with your leg bent
slightly.
3 First steps
3.1 Checking the tightening torques
Check that all screws and important components are fas-
tened securely and correctly. You will nd a table with the
prescribed tightening torques in Chapter 12 “Technical
data” of the General User Manual (CD).
3.2 Fitting the pedals
It may be that the pedals for your Pedelec have yet to be
tted on delivery:
The right pedal (marked with an “R”) is screwed clockwise
into the right crank arm. The le pedal (marked with an
“L”) is screwed anticlockwise into the le crank arm. Both
pedals are screwed in tightly in the direction of the ont
wheel using a size15 open-ended spanner or a suitable
Allen key. The tightening torque is 40Nm.
If the pedals are not screwed in straight, the thread in
the crank arm may be severely damaged.
3.3 Adjusting the saddle height
3.3.1 Clamping bolt
If a torque is specied (in Nm) on the seatpost clamp,
tighten the clamping bolt to this torque. If no tightening
torque is specied, tighten an M6 bolt (dia. 6mm) and an
M5 bolt (dia. 5mm) to 5.5Nm.
3.3.2 Quick-release device
For opening, the quick-release lever must be folded
back through 180° – you will see the lettering “OPEN”.
For closing, fold the quick-release lever back in through
180°– you will see the lettering “CLOSE”.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Pedelec Impulse 2.0 Ergo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Pedelec Impulse 2.0 Ergo in the language / languages: English, German as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Pedelec Impulse 2.0 Ergo

Kalkhoff Pedelec Impulse 2.0 Ergo User Manual - English, German, Dutch, French, Italian, Spanish - 289 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info