725632
31
Zoom out
Zoom in
Previous page
1/64
Next page
Original User Guide | Pedelec Integrale 0.5 Version 2 EN-31
5.6.2 Removal
In order to protect your Pedelec from unauthorised use by
third parties or from theft, the display should always be
removed from the handlebar when not in use. However,
removing the display is no substitute for securing your
Pedelec against theft, for example with an appropriate
bicycle lock.
The system should be switched o before the removal.
Attaching or removing the display when the Pedelec is
switched on will not, however, cause any damage.
The system will switch o approx. 15 seconds after it
is removed. If it was switched on, the lighting will also
switch o after approx. 15 seconds. After removing the
display, wait approx. 30 seconds before switching it back
on. Otherwise, a successful system initialisation cannot be
guaranteed.
1. Turn the display on the mounting plate counterclockwise by approx. 90
degrees. This will disconnect the electrical connection, and the display
can then be removed.
For 1. Turn the display on the mounting plate counterclockwise by approx. 90 degrees.
5.6 Attaching and removing the display
The procedure is the same for both displays.
5.6.1 Attachment
1. Hold the display in your hand – the cover of the USB port should
protrude slightly and face downward.
2. Turn the display to the left, counterclockwise, until it is horizontal.
3. Place the display in this position onto the mounting plate.
For 3. Position the display horizontally on the mounting plate.
4. Now turn the display clockwise by 90 degrees. The electrical
connections are completed automatically. Once the display is vertical
and locked into position, it is completely attached.
For 4. Turn the display clockwise by 90 degrees.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Neodrives Integrale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Neodrives Integrale in the language / languages: English as an attachment in your email.

The manual is 9,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Neodrives Integrale

Kalkhoff Neodrives Integrale User Manual - German - 66 pages

Kalkhoff Neodrives Integrale User Manual - Dutch - 64 pages

Kalkhoff Neodrives Integrale User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info