780091
19
Zoom out
Zoom in
Previous page
1/53
Next page
Original User Guide | Groove Go Pedelec Version 1 EN-19
3.3 Shifting and tilting the saddle
DANGER
Never clamp the saddle in the curve of the saddle rail; always do it in
the straight section. Only shift the saddle within the straight section
(g.1). Saddles that stay clamped outside this area can fail (g. 2).
correct
Clamping screw
Fig. 1
wrong
Fig. 2
Use a torque wrench to tighten the clamping screws. Observe the
specied torque setting. If no value is shown on the component, use
the torque settings from the following table:
Thread Tightening torque [Nm]
M5 / M6 / M8 M5: 5.5 / M6: 5.5 / M7: 14 / M8: 20
Failure to comply can result in screws/bolts becoming loose, tearing
away or fracturing. If that happens while you are riding the bike,
components may come o and you could have a severe crash. If
screws are overtightened, components can also be damaged.
3.3.1 Screw supports: Shifting and tilting the saddle*
1. Loosen the clamping screw by turning it
anticlockwise. Turn the screw completely
two to three times at most or the whole
mechanism could fall apart.
2. Move the saddle backwards or forwards as
required.
3. Tilt the bicycle saddle to the desired angle.
4. Tighten the clamping screw by turning it clockwise with a torque
wrench.
5. Ensure that the newly-tightened saddle does not tip; test it by pressing
down on the front and back alternately.
For 1. Loosen the clamping screw
*dependent on model
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Groove Go - 2016-2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Groove Go - 2016-2017 in the language / languages: English as an attachment in your email.

The manual is 6.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Groove Go - 2016-2017

Kalkhoff Groove Go - 2016-2017 User Manual - German - 53 pages

Kalkhoff Groove Go - 2016-2017 User Manual - Dutch - 55 pages

Kalkhoff Groove Go - 2016-2017 User Manual - French - 53 pages

Kalkhoff Groove Go - 2016-2017 User Manual - Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info