516531

Kalkhoff Crossbike Manual

25
Zoom out
Zoom in
Previous page
1/68
Next page
I General User Manual 25
18.2.2 Removing the rear wheel
If your bike is equipped with derailleur gears, shi
down to the smallest sprocket. The rear derailleur
does not prevent the wheel om being removed in
this position.
If quick-release devices are tted to your bike,
open them (see
Chapter 9.2.2 "Operating the
quick-release device").
If axle nuts are tted to your bike, release these
by turning them anticlockwise using a suitable
spanner.
Fold the rear derailleur backwards slightly.
Li the bike up slightly.
Pull the wheel out of the ame.
If the rear wheel still does not come out, open the
quick-release device rther by turning the lock nut
anticlockwise.
Strike the wheel om above gently with the palm
of your hand to shi it.
The wheel should drop out.
The example here shows the removal of a Shimano hub gear:
Disconnect the shiing cable to remove the rear wheel
Disconnect the cable om the cassette joint to
remove the rear wheel om the ame
CJ-8S20
JAPAN
LOCK
Cassette joint
1. Set the Revo-shi lever to 1.
Set to 1
18.1.3 Opening the side-pull calliper brake
Open the quick-release lever on the brake arm or
brake lever.
If no quick-release brake mechanisms are tted,
deate the tyre. The wheel can now be pulled out
between the brake pads.
18.1.4 Releasing the hub gears, roller, drum
or back-pedal brakes
Undo the cable clamping screw or quick-release
device on the brake arm.
With back-pedal brakes, the screw connection of
the brake arm on the chain stay must be released.
18.2 Removing the wheel
Please note that the work steps described here are for a
specic example.
Please observe the information by the relevant manufac-
turer or consult your specialist cycle shop.
18.2.1 Removing the ont wheel
If quick-release devices are tted to your bike,
open them (see
Chapter 9.2.2 "Operating the
quick-release device").
If axle nuts are tted to your bike, release these
by turning them anticlockwise using a suitable
spanner.
If the dropouts are specially formed to prevent the
ont wheel om falling out, continue loosening
the nuts by turning them anticlockwise. Once the
washers and nuts are clear of the dropouts, pull the
ont wheel out of the fork.
If your bike is equipped with metal wheel locking
devices, continue loosening the nuts by turning
them anticlockwise.
Pull the metal locking devices apart until they are
clear of the dropout.
Now pull the ont wheel out of the fork.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Crossbike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Crossbike in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Crossbike

Kalkhoff Crossbike User Manual - German - 68 pages

Kalkhoff Crossbike User Manual - Dutch - 69 pages

Kalkhoff Crossbike User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info