Manual Kalkhoff Continental System - 2019 (page 45 of 72) (English)

780088

Zoom out

Zoom in

1/72

16Continental eBike System – BATTERY

7 Rectifying malfunctions

The CeBS detects malfunctions, which then

appear on the display in the form of error codes.

Malfunctions detected by the CeBS appear in the

centre of the display. The displayed error code

specifies the cause of the malfunction to make

the error easier to correct.

WARNING!

Risk of electric shock!

Contact with open cable ends when the CeBS is

switched on can cause electric shocks.

» Do not switch on the CeBS if you notice any

open cable ends.

» Have the cabling inspected and repaired by

your local cycle dealer.

If an error code appears on the display, immedi-

ately check which malfunction has occurred.

The letter in the error code relates to the affected

component on the CeBS:

• M = Motor

• B = Battery

• D = Display

» Error codes that do not affect the function or

safety of the unit can be acknowledged by

pressing the button.

» In the case of permanent or recurrent error

codes, please have your local cycle dealer

check the malfunction using service software.

8 Storage

NOTE: The battery should not be stored unused

for more than three months.

» Store the battery at room temperature (20°C)

in a dry location protected from direct sunlight.

» Protect the battery from direct sunlight.

» The ideal charge level for extended storage

periods is approx. 20–40 %. If necessary,

charge the battery to this value before and

during storage (every 3 months).

» If you intend to use the eBike in the winter,

you should not store the battery in unheated

rooms. Charge the battery at room tempera-

ture and only insert in the eBike just before

you start your journey.

9 Transport

ATTENTION!

Risk of damage!

Impacts and bumps may damage the battery and

display during transportation of the eBike.

» Remove the battery and display from the

eBike and transport both separately.

» Transport the battery with special care.

9.1 Transporting the eBike with

CeBS

» Remove the battery from the battery holder

on the eBike.

» Always cover the display before transporting

separately from the eBike. A tight seal is only

fully guaranteed when the USB cover is closed.

» When transporting an eBike fitted with a CeBS,

ensure that none of the fitted components are

damaged.

» Secure the eBike fitted with a CeBS appropri-

ately to prevent damage to the CeBS compo-

nents. Before transporting the eBike, observe

all the relevant specifications provided by the

eBike manufacturer.

» If you intend to transport your eBike by bus,

aeroplane, boat or train, contact the relevant

transport company to find out the conditions

under which the battery will be transported.

9.2 Sending the battery by post

NOTE: Batteries sent by post are subject to the

provisions of the hazardous goods law. Undam-

aged batteries can be transported by private

users on the road without further requirements.

Batteries transported by commercial users or

third parties (e.g. air freight or haulage compa-

nies) are subject to special packaging and label-

ling requirements (e.g. provisions of the ADR).

» Do not dispatch the battery yourself. If you

have any questions about transporting

batteries, please contact your local cycle

dealer, who will be able to arrange suitable

transportation.

» Before sending the battery, make sure that the

both the battery and housing are undamaged.

The sender is liable for any damage to defec-

tive batteries during transportation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Continental System - 2019 in the language / languages: English as an attachment in your email.

The manual is 12.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Continental System - 2019

Kalkhoff Continental System - 2019 User Manual - German - 76 pages

Kalkhoff Continental System - 2019 User Manual - Dutch - 80 pages

Kalkhoff Continental System - 2019 User Manual - French - 76 pages

Kalkhoff Continental System - 2019 User Manual - Italian - 74 pages

Kalkhoff Continental System - 2019 User Manual - Spanish - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kalkhoff Continental System - 2019 Manual

Product: