694583
30
Zoom out
Zoom in
Previous page
1/55
Next page
5.8 Fireplace testing
Test the fireplace by lighting it (see Chapter 5 ‘Lighting the
fireplace’) and check the operation of the flue before finishing the
surround.
CAREFUL! When the newly-installed fireplace burns for
the first time, the enamel can emit a smell. This smell will
disappear naturally after a few hours, once the enamel has
completely hardened.
5.9 Placing and finishing the fireplace surround
To create the surround around the fireplace, materials with the
following characteristics can be used:
Resistant to high temperatures, minimum 700 °C.
Free from materials that can cause fumes and odour
nuisance.
Dimensionally stable, even after lengthy exposure to high
temperatures.
Keep in mind the following:
1. The surround must have no direct connection to the
fireplace; it must be self-supporting.
2. Seal the joints between the fireplace and the surround,
using heat-resistant glass fibre or ceramic cord.
3. Use a mantel iron for easy and stable mounting of the span
above the door of the fireplace.
Figure 30: Side panel finish
Side panel finish
WARNING Never attach this mantel iron to the actual
fireplace, but to the side of the surround or use tie rods to
attach it to the ceiling or wall.
4. Ensure that the thickness of the surround above the door
of the fireplace does not exceed 11 cm. Otherwise, the
fireplace will be too deeply recessed and it will be dicult to
operate and/or clean the door
5. Finish the surround using materials that do not contain any
plastic substances. High temperatures may cause plastic to
discolour.
6. Before completely closing o the surround, ensure that the
inside is clean and free of dust. Preferably use a vacuum
cleaner to clean the inside of the surround. If you fail to do
this, dust particles may cause problems with the air flow of
the convection system.
7. The fireplace is surrounded by a metal strip which facilitates
the join between the surround and the fireplace. These
metal strips can be hidden from view on the front; all the
lines of the surround then merge into the finishing strips.
The side strips can be demounted inwards, so the guide can
be accessed in the event of maintenance.
CC
Cross-section C-C
Ensure that the surround/stucco does not
protrude from this converted side. This prevents
the design trims on both sides of the Kalfire
W53/50R, W66/48S and W 90/47S from being
obstructed.
Surround
30
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire W80-52T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire W80-52T in the language / languages: English as an attachment in your email.

The manual is 8,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire W80-52T

Kalfire W80-52T User Manual - German - 56 pages

Kalfire W80-52T User Manual - Dutch - 55 pages

Kalfire W80-52T User Manual - French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info