694581
37
Zoom out
Zoom in
Previous page
1/55
Next page
6.6 Optimal heat output
Once you have the fireplace lit and it is at a comfortable
temperature, observe the following instructions for optimal heat
output (this will achieve comparable performance and emission
values as obtained during the inspections of the Kalfire W):
Ensure a glowing bed is created (See Section 6.5).
Use logs of wood of approximately the same size. The
amount diers per fireplace model, see the table below.
Rule of thumb: 1 kg of wood provides about 4 kW of energy.
The fireplace is suitable for discontinuous use. This is achieved by
burning according to Table 7.
Table 7: Instructions for optimal burning per model
*Weight for beechwood
6.6.1 Topping up with wood
As soon as the fireplace is at a comfortable temperature
(see Section 6.5), you can replenish the wood in the fireplace.
To achieve optimal heat output:
top up the fire with new wood as soon as the flames
have disappeared and the logs are beginning to glow
(no smoke development).
Open the door slowly to prevent smoke escaping into
the room because of the sudden draught.
Do not add more than 2 to 3 logs (for maximum weight,
see Table 6).
Place the logs as follows:
Kalfire W45/48F
Place the two logs into a V-shape. The Kalfire W45/48F can be
used both as an open or a closed fireplace.
Remove both bae plates before using the fireplace with the door
open, to enable correct exhaust of the flue gas.
Kalfire type W45/48F W53/50R W60/51F W70/33F W71/62F W85/40F W100/61F
Weight* per log (g)
850 950 850
730 1000 850 1200
Number of logs 2 3 3 3 3 3 3
Max. weight of wood per hour (kg) 2.3 2.85 3.6 2.9 5 4 3.6
Air regulation open (%) 100 45 100 75 50 100 60
Kalfire type W65/38C W66/48S W80/52T W90/47C W90/47S W105/47F W105/47T
Weight* per log (g) 950 975 850 850 1400 1300 1100
Number of logs 3 3 4 4 3 3 4
Max. weight of wood per hour (kg) 4 3.5 4.5 4 5.5 4.6 5
Air regulation open (%) 30 25 90 10 50 100 50
37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire W70-33F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire W70-33F in the language / languages: English as an attachment in your email.

The manual is 8,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire W70-33F

Kalfire W70-33F User Manual - German - 56 pages

Kalfire W70-33F User Manual - Dutch - 55 pages

Kalfire W70-33F User Manual - French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info