694579
24
Zoom out
Zoom in
Previous page
1/55
Next page
5.4.2 Rear flue connection of Kalfire W53/50R
The Kalfire W53/50R is standardly delivered with the flue exit
connection on the top of the appliance. This can be converted into
a rear connection, see Appendix F.
5.4.3 Reducer ring
This fireplace is standardly delivered with a reducer ring
(excepting the Kalfire W53/50R) This ring can be used to connect
various flue systems to the Kalfire.
Kalfire type Connecting collar (mm)
A
(mm)
B
(mm)
C
(mm)
W45/48F Ø148 ±2 Ø156 ±1 Ø136 ±1 Ø152 ±1
W60/51F, W70/33F, W65/38C Ø178 ±2 Ø186 ±1 Ø166 ±1 Ø182 ±1
W85/40F, W66/48S, W80/52T,
W53/50R
Ø198 ±2 Ø206 ±1 Ø186 ±1 Ø202 ±1
W53/50R, W71/62F, W90/47C,
W90/47S, W100/61F, W105/47F,
W105/47T
Ø248. ±2 Ø256 ±1 Ø236 ±1 Ø248. ±1
Table 4: Diameter of chimney connecting collar
Figure 22: Reducer ring
An adapter ring is supplied with the Kalfire W65/38C and the
W90/47S models; this ring is slid onto the reducer ring. The
adapter ring for the Kalfire W65/38C is Ø180/ Ø200,
the reducer ring for the Kalfire W90/47S is Ø250/ Ø300. When
choosing the flue duct, bear in mind:
Kalfire W65/38C
Connection to a Ø200 flue duct is only possible with a chimney
duct of minimum 4.5 metres and maximum 6 metres long
Kalfire W90/47S
Connection to a Ø300 flue duct is only possible with a chimney
duct of a minimum 4.5 metres and a maximum 6 metres long.
5.5 Mounting the damper (optional)
The fireplace is standardly delivered without a damper. An
external damper can be used to influence the draught (suction)
in the flue. If there is too much suction in the flue, we advise you
to use a damper. You can test whether a damper is necessary
while checking the fireplace. Pay extra attention to this aspect,
if the flue is longer than 7 metres. Normally, the fireplace can be
controlled well using the secondary air regulation.
A
4040
40
B
C
Points for attention:
•
Make sure that the position of the damper is visible for the
end user. For this purpose, most of the operating knobs
have a position indication (Open = Auf or +, Closed = Zu or -).
•
Check the functioning of the damper before completing the
installation of the fireplace.
•
Make sure that the end user is familiar with how the
damper functions.
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire W65-38C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire W65-38C in the language / languages: English as an attachment in your email.

The manual is 8,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire W65-38C

Kalfire W65-38C User Manual - German - 56 pages

Kalfire W65-38C User Manual - Dutch - 55 pages

Kalfire W65-38C User Manual - French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info