694589
22
Zoom out
Zoom in
Previous page
1/55
Next page
If you do not want to use the flue diameters listed in Table 3,
you can use the formula below to calculate a potentially smaller
diameter.
Permitted reduction:
•
Flue Ø150 Reduction not allowed.
•
Flue Ø180 Maximum reduction of 30 mm. Reduction not
allowed for the Kalfire W65/38C.
•
Flue Ø200 Maximum reduction of 20 mm. Reduction not
allowed for the Kalfire W53/50R, W66/48S and W80/52T.
•
Flue Ø250 Maximum reduction of 50 mm.
WARNING After reducing the flue, it is no longer possible to
use the models suitable for this as an open fireplace (Kalfire
W60/51F, W71/62F, W85/40F) Reduction is permitted
immediately behind the damper/connecting collar, but not
any deeper into the flue. In case of doubt, always use the
connection diameter indicated on the fireplace.
Avoid horizontal runs; one extension may be placed with
adjustable elbows with a maximum change of direction of
45°. Apply it directly to the appliance.
Kalfire advises you to insulate the flue; this will reduce the
risk of the smoke condensing and will improve the draught.
Use the Kalfire stainless steel double-walled flue duct for
this purpose.
Kalfire advises you not to use larger flue diameters than
the connection present on the Kalfire. Using a larger flue
diameter can result in the following problems:
- Too fast and uncontrolled combustion
- Irregular flames;
- Reduced heat output.
Use a draught hood if there is a flue with a (too) strong
draught that can cause quick, uncontrolled combustion and
irregular flames.
Use of dierent flue diameters to those indicated, is entirely
for the risk of the installer; when the door is opened, smoke
may escape back into the room or it may be more dicult to
ignite the fireplace.
Take factors in the surrounding environment into account
that could cause a strong draught in the flue. For example,
frequent high winds, which require a damper to be
mounted.
•
Pay attention that it is also possible to sweep the chimney
in the connection piece.
Fsch
Fso
Hsch
e
Flue section in cm
2
Surface of firebox in cm
2
Height of flue in metres measured from the upper side of the Kalfire.
Influence factor between 0.2 and 0.6 determined by the flue quality:
0.2 with a perfect flue, straight above the Kalfire; 0.6 with connection
less than 45°.
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire W105-47T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire W105-47T in the language / languages: English as an attachment in your email.

The manual is 8,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire W105-47T

Kalfire W105-47T User Manual - German - 56 pages

Kalfire W105-47T User Manual - Dutch - 55 pages

Kalfire W105-47T User Manual - French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info