694543
19
Zoom out
Zoom in
Previous page
1/40
Next page
19
“TCOM” (temperature comfort).
TCOM indicates the maximum
temperature during all set time
segments.
5. Set the desired temperature with the
+ or - buttons at increments of 0.5°C.
6. Confirm by pressing the
(centre
button).
7. “TECO” (temperature ECO) will now
appear in the display. TECO is the
minimum temperature between the
time segments. This minimum tem-
perature will be maintained all day
with the exception of the set time
segments.
8. Set the desired temperature with the
+ or - buttons at increments of 0.5°C.
9. Confirm by pressing the
(centre
button).
10. Press the right button
, so that a
flashing time in hours and minutes
appears in the top left-hand corner,
while “ON 1” appears in the middle
of the display (this is the first “on”
time).
11. Use the + and - buttons to set the
first “on” time at increments of
15 minutes.
12. Confirm by pressing the centre but-
ton
if you are happy with
the time.
13. “OFF 1” will then appear (this is the first
“Out” time).
14. Use the + and - buttons to set the
first “out” time, at increments of
15 minutes.
15. Confirm by pressing the
button.
16. Programme the other times in the
three segments in this way; should
you not require all time segments,
these other segments should be set
4.8 Setting the flame intensity by
thermostat
The remote control measures the
temperature and the flame intensity is
modulated accordingly. To ensure an
accurate temperature reading, make
sure the remote control is outside of
the fire’s radiation range.
1. Select the thermostat programme
as indicated in paragraph Selecting
the thermostat or manual operating
programme on page 18.
2. Press the button with the +or with
the -so that the temperature indica-
tor on the display starts to flash.
3. Set the desired temperature with the
+ and - buttons.
4. Wait for 10 seconds before using the
remote control to save the set tem-
perature.
4.9 Programming time segments
The thermostat function can be com-
bined with a timer programme that
allows for up to three time segments to
be programmed. These are indicated by
switch-on times ON 1, 2, 3 and switch-
off times OFF 1, 2, 3. The set program-
me will run daily.
1. Check if the hand transmitter is set
at the right time (if you are not hap-
py with the time, see: 4.3 Day and
night settings)
2. Press the P button (hold down brie-
fly).
3. Let go of Button P when the time
starts to flash in the top left-hand
corner of the display.
4. Press the right button
to display
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire GP85-55S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire GP85-55S in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire GP85-55S

Kalfire GP85-55S User Manual - German - 44 pages

Kalfire GP85-55S User Manual - Dutch - 41 pages

Kalfire GP85-55S User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info