694540
32
Zoom out
Zoom in
Previous page
1/40
Next page
32
Error code Cause Solution
29A
Problem
with
regulating
the gas
valve,
no flame
during
ignition
1. Check whether the gas valve is open.
2. Measure the gas pressure at the gas valve intake.
This must be > 20 mbar or with a G30(B/P) > 40 mbar.
3. Measure the burner pressure with the measurement
nipple behind the gas valve.
4. Check the gas valve wiring and connection.
5. Change gas valve settings, parameter TP01 or TP02.
6. Check/replace the gas valve.
33F
Low voltage
gas valve
Replace automatic burner relay
34F
Insufficient
voltage
1. Measure mains voltage (>220VAC)
2. Measure outgoing transformer voltage 24 VDC and
12 VDC.
3. If the outgoing voltage is lower than 20 VDC or 10
VDC, replace the transformer.
4. If the outgoing voltage is correct, check the wiring for
short-circuits.
35F
Problem
with the
electrical
driver
Replace automatic burner relay
50F
Gas valve
wiring
problem
Check the wiring and power plug connection.
Repair if necessary.
51A
Failure of
ionisation
signal
during while
fire is alight.
1. Check whether the ionisation pen is obstructed in the
fireplace.
2. Check whether the flame remains nicely in the
ionisation pen. In case the flame becomes transparent,
recirculation is occurring.
3. Check flue duct configuration.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalfire GP70-75S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalfire GP70-75S in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalfire GP70-75S

Kalfire GP70-75S User Manual - German - 44 pages

Kalfire GP70-75S User Manual - Dutch - 41 pages

Kalfire GP70-75S User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info